Willie, Can you change the tape from SCRATCH to MASTER? If it is changed in RMM to MASTER you should be able to read it.
Rex -----Original Message----- From: IBM Mainframe Discussion List [mailto:[EMAIL PROTECTED] On Behalf Of willie bunter Sent: Wednesday, April 11, 2007 4:58 PM To: [email protected] Subject: Re: IEC145I 413-08 Can I force RMM to allow me to read the tape even though it is in scratch status? "Pommier, Rex R." <[EMAIL PROTECTED]> wrote: Well, you're kinda both right. It is failing due to an I/O error trying to read the input tape. The reason you're getting the I/O error is that RMM isn't letting you read the scratch tape. So the underlying cause is that it is a scratch tape. So, the other opinion is more right... Rex -----Original Message----- From: IBM Mainframe Discussion List [mailto:[EMAIL PROTECTED] On Behalf Of willie bunter Sent: Wednesday, April 11, 2007 4:30 PM To: [email protected] Subject: IEC145I 413-08 We are having a difference of opinion with the following issue. A gener job is failing on an IEC145I 413-08. My interpretation is that the job failed because of an I/O error. The other opinion is that because the tape is scratch (in RMM) and it does not permit the processing of a scratch tape. Can we both be right? EDG4025I VOLUME J01932 REJECTED. READING OF SCRATCH VOLUMES OR VOLUMES OBTAINED WITH GETVOLUME IS NOT PERMITTED EDG4006E VOLUME J01932 ON 4611 REJECTED FOR USE BY O00130J, STEP01, SYSUT1, OPEN REQUEST FAILED BY DFSMSrmm IEC145I 413-08,IFG0194K,O00130J,STEP01,SYSUT1,4611,,AMR4.PSEL$08.PFG98.Y2K.DRTES Thanks ---------------------------------------------------------------------- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html
