I had sysprog friend at another company that tried going from 1.4 to 1.8 and JES would come up on the old spool and he said that he had done the $ACTIVATE to Z2 mode.
Michael Saraco From: Mark Zelden <[EMAIL PROTECTED]> To: [email protected] Date: 03/07/2008 09:16 AM Subject: Re: upgrading z?OS 1.4 to 1.8 or 1.9 On Fri, 7 Mar 2008 08:44:57 -0600, Michael Saraco <[EMAIL PROTECTED]> wrote: >You will not be able to bring across your JES spool you will have to >offload then reload to your new spool. Why? As long as they have done an $ACTIVATE to Z2 mode (which is the z/OS 1.2 level) there is no reason they can't move forward with a warm start. $ACTIVATE LEVEL=Z2 is supported up to z/OS 1.7 if they haven't done it yet. Mark -- Mark Zelden Sr. Software and Systems Architect - z/OS Team Lead Zurich North America / Farmers Insurance Group - ZFUS G-ITO mailto:[EMAIL PROTECTED] z/OS Systems Programming expert at http://expertanswercenter.techtarget.com/ Mark's MVS Utilities: http://home.flash.net/~mzelden/mvsutil.html ---------------------------------------------------------------------- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html ---------------------------------------------------------------------- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html
