Good morning all,
This has been installed on our sandbox lpar running z/OS 1.9.
After wrestling with it to get it working, I have run up against a wall.
Would any of you who know this CBT utility take a gander at what is
going on?
I looked up the error code, but do not know what to change, or if I
missed something. Please feel free to contact me off list if needed.
Output follows and the job get zero return codes, but?
IEA995I SYMPTOM DUMP OUTPUT 043
SYSTEM COMPLETION CODE=0C6 REASON CODE=00000006
TIME=09.25.28 SEQ=00253 CPU=0000 ASID=0031
PSW AT TIME OF ERROR 078D0000 93508A09 ILC 2 INTC 06
ACTIVE LOAD MODULE ADDRESS=13500B50 OFFSET=00007EB9
NAME=SHOWZOS
DATA AT PSW 13508A03 - C5E25D00 000000C0 E50000A5
GR 0: 00000000_00000000 1: 00000000_000000B4
2: 00000000_00001228 3: 00000000_00FE2710
4: 00000000_13560AF0 5: 00000000_14CF501E
6: 00000000_00000000 7: 00000000_00000000
8: 00000000_00FD8DD0 9: 00000000_008FF050
A: 00000000_13560ACD B: 00000000_008FF358
C: 00000000_1351E780 D: 00000000_00007008
E: 00000000_13508A06 F: 00000010_00000008
END OF SYMPTOM DUMP
Regards,
Claude Richbourg
Florida Department of Corrections
z/OS Systems Programmer
850-921-1383
----------------------------------------------------------------------
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to [EMAIL PROTECTED] with the message: GET IBM-MAIN INFO
Search the archives at http://bama.ua.edu/archives/ibm-main.html
