----------------------<snip>-----------------
IEA995I SYMPTOM DUMP OUTPUT 043
SYSTEM COMPLETION CODE=0C6 REASON CODE=00000006
TIME=09.25.28 SEQ=00253 CPU=0000 ASID=0031
PSW AT TIME OF ERROR 078D0000 93508A09 ILC 2 INTC 06
ACTIVE LOAD MODULE ADDRESS=13500B50 OFFSET=00007EB9
NAME=SHOWZOS
DATA AT PSW 13508A03 - C5E25D00 000000C0 E50000A5
GR 0: 00000000_00000000 1: 00000000_000000B4
2: 00000000_00001228 3: 00000000_00FE2710
4: 00000000_13560AF0 5: 00000000_14CF501E
6: 00000000_00000000 7: 00000000_00000000
8: 00000000_00FD8DD0 9: 00000000_008FF050
A: 00000000_13560ACD B: 00000000_008FF358
C: 00000000_1351E780 D: 00000000_00007008
E: 00000000_13508A06 F: 00000010_00000008
END OF SYMPTOM DUMP
-------------------------<unsnip>----------------------
The 0C6 is due to branching to an odd address. Looking at the "Data at
PSW", it looks like a branch into a data area, just after a character
constant that ends in "ES)".
What changes, if any, have you made in the code? This sort of problem is
often caused by invalidly altering a base register, or a local
subroutine's return address.
Hopefully, any changes you've made are well flagged, so you can find and
check them again. Good luck. :-)
----------------------------------------------------------------------
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to [EMAIL PROTECTED] with the message: GET IBM-MAIN INFO
Search the archives at http://bama.ua.edu/archives/ibm-main.html
