Hi All
Sorry for the delay in getting back but I'm now back on the task of
setting up my sysplex.
I seem to have opened a can of worms here!
I'm a one man band as it were and do all the sysproging here, VM Z/OS
VTAM TCPIP etc so I get it to work and leave it as not having the time
to full understand the internals of how it work and what's happening
under the covers.
This is what I did
In my original TCPIP PROFILE I had the Link and device statements for
the OSA, Enterprise Extender, and IUSAMEH use by E/E and the 2 home
addresses.
DEVICE OSA400 MPCIPA NONROUTER <= the OSA I was having the problem with
LINK LNKOSA40 IPAQGNET OSA400
DEVICE EEVIPAD VIRTUAL 0 <= Enterprise Extender
LINK EEVIPAL VIRTUAL 0 EEVIPAD
DEVICE IUTSAMEH MPCPTP AUTORESTART <= required for E/E
LINK IUTSAMEH MPCPTP IUTSAMEH
HOME
10.5.1.110 LNKOSA40 <= Home address for OSA
10.5.1.151 EEVIPAL <= Home address for E/E
I then did a V,TCPIP,,START,OSA400 which for some reason issues the
EZZ0331I message always has. I also get this if I do an OBEYFILE that
alters any of the devices in the TCPIP profile.
At this point I did not have any DYNAMICXCF statements active in My
TCPIP profile I know that DYNAMICXCF dynamically create IUSAMEH
statement for you if you have it allocated you get a duplicate IUSAMEH
error message when you bring TCPIP up.
Hope this has cleared this up Let me know of not.
One question I have 2 OSA cards with 64 address defined to each port.
The devices are attached to ZOS systems under VM of on 1st OSA I have
1600-1603 attached to ZPLEX1 as 400-403 with a port name of OSA400, I
have 1604-1607 attached to ZPLEX2 400-403 with a port name of OSA400
and all subsequent systems that use the 16nn OSA range this is what it
seems to imply by the 3150 error.
X'3150' Wrong Portname
Explanation: An attempt was made to activate
an OSA-Express port in QDIO mode. The Portname
for this activation attempt did not match the Portname
already assigned to this port by a previous user.
All z/OS users of that port must activate with
the same Portname.
Best Regards
Stuart
-----Original Message-----
From: IBM Mainframe Discussion List [mailto:[email protected]] On
Behalf Of Chris Mason
Sent: 21 February 2009 09:29
To: [email protected]
Subject: Re: OSA's Error codes
Stuart
Would you know how it came about that there the following message
appeared in the log in your first post but did *not* appear in the two
logs in
your second post?
EZZ0331I NO HOME ADDRESS ASSIGNED TO LINK IUTSAMEH
Did you have explicitly defined a pair of DEVICE and LINK statements in
essence if not completely as follows:
DEVICE IUTSAMEH MPCPTP
LINK IUTSAMEH MPCPTP IUTSAMEH
which you removed?
It would be surprising if you had removed that DEVICE and LINK pair and
then
performed your tests in answer to Ed Finnell's post since it was
precisely that
interface definition to which Ed was referring!
Chris Mason
On Thu, 19 Feb 2009 15:22:29 -0000, Stuart Willis
<[email protected]> wrote:
>Hi
>
>I have proved (I think) that the OSA dose have a Home address.
>
>Output from the TCPIP proc with a Home address all I get is the
EZZ4310I
>
>-----------------------------------------------------------------------
-
>
>
>
>---- THURSDAY, 19 FEB 2009 ----
>
> IEF695I START TCPIP WITH JOBNAME TCPIP IS ASSIGNED TO USER
TCPIP
>, GRO
> $HASP373 TCPIP STARTED
>
> IEF403I TCPIP - STARTED - TIME=09.03.46
>
> IEE252I MEMBER CTIEZB00 FOUND IN ADCD.Z110.PARMLIB
>
> IEE252I MEMBER CTIIDS00 FOUND IN SYS1.PARMLIB
>
> IEE252I MEMBER CTINTA00 FOUND IN SYS1.PARMLIB
>
> EZZ7450I FFST SUBSYSTEM IS NOT INSTALLED
>
> EZZ0162I HOST NAME FOR TCPIP IS ZOS10
>
> EZZ0300I OPENED PROFILE FILE DD:PROFILE
>
> EZZ0309I PROFILE PROCESSING BEGINNING FOR DD:PROFILE
>
> EZZ0316I PROFILE PROCESSING COMPLETE FOR FILE DD:PROFILE
>
> EZZ0334I IP FORWARDING IS DISABLED
>
> EZZ0335I ICMP WILL IGNORE REDIRECTS
>
> EZZ0338I TCP PORTS 1 THRU 1023 ARE RESERVED
>
> EZZ0338I UDP PORTS 1 THRU 1023 ARE RESERVED
>
> EZZ4202I Z/OS UNIX - TCP/IP CONNECTION ESTABLISHED FOR TCPIP
>
> EZZ4310I ERROR: CODE=80103150 REPORTED ON DEVICE OSA400.
DIAGNOSTIC
>CODE: 03
> EZZ4315I DEACTIVATION COMPLETE FOR DEVICE OSA400
>
> EZB6473I TCP/IP STACK FUNCTIONS INITIALIZATION COMPLETE.
>
> EZAIN11I ALL TCPIP SERVICES FOR PROC TCPIP ARE AVAILABLE.
>
> EZD1176I TCPIP HAS SUCCESSFULLY JOINED THE TCP/IP SYSPLEX GROUP
>EZBTCPCS
> S FTPD
>
> S PORTMAP
>
>EZZ0162I HOST NAME FOR TCPIP IS ZOS10
>EZZ0300I OPENED PROFILE FILE DD:PROFILE
>EZZ0309I PROFILE PROCESSING BEGINNING FOR DD:PROFILE
>EZZ0316I PROFILE PROCESSING COMPLETE FOR FILE DD:PROFILE
>EZZ0334I IP FORWARDING IS DISABLED
>EZZ0335I ICMP WILL IGNORE REDIRECTS
>EZZ0338I TCP PORTS 1 THRU 1023 ARE RESERVED
>EZZ0338I UDP PORTS 1 THRU 1023 ARE RESERVED
>
>
>
>Remove the Host entry I get the EZZ4310I error and an EZZ0331I no Home
>----------------------------------------------------------------------
>address
>-------
>
>
>---- THURSDAY, 19 FEB 2009 ----
>
> IEF695I START TCPIP WITH JOBNAME TCPIP IS ASSIGNED TO USER
TCPIP
>, GROU
> $HASP373 TCPIP STARTED
>
> IEF403I TCPIP - STARTED - TIME=09.12.40
>
> IEE252I MEMBER CTIEZB00 FOUND IN ADCD.Z110.PARMLIB
>
> IEE252I MEMBER CTIIDS00 FOUND IN SYS1.PARMLIB
>
> IEE252I MEMBER CTINTA00 FOUND IN SYS1.PARMLIB
>
> EZZ7450I FFST SUBSYSTEM IS NOT INSTALLED
>
> EZZ0162I HOST NAME FOR TCPIP IS ZOS10
>
> EZZ0300I OPENED PROFILE FILE DD:PROFILE
>
> EZZ0309I PROFILE PROCESSING BEGINNING FOR DD:PROFILE
>
> EZZ0323I HOME STATEMENT ON LINE 136 HAD NO ENTRIES
>
> EZZ0316I PROFILE PROCESSING COMPLETE FOR FILE DD:PROFILE
>
> EZZ0334I IP FORWARDING IS DISABLED
>
> EZZ0335I ICMP WILL IGNORE REDIRECTS
>
> EZZ0331I NO HOME ADDRESS ASSIGNED TO LINK LNKOSA40 <=======
>
> EZZ0338I TCP PORTS 1 THRU 1023 ARE RESERVED
>
> EZZ0338I UDP PORTS 1 THRU 1023 ARE RESERVED
>
> EZZ4202I Z/OS UNIX - TCP/IP CONNECTION ESTABLISHED FOR TCPIP
>
> EZZ4310I ERROR: CODE=80103150 REPORTED ON DEVICE OSA400.
DIAGNOSTIC
>CODE: 03
> EZZ4315I DEACTIVATION COMPLETE FOR DEVICE OSA400
>
> EZB6473I TCP/IP STACK FUNCTIONS INITIALIZATION COMPLETE.
>
> EZAIN11I ALL TCPIP SERVICES FOR PROC TCPIP ARE AVAILABLE.
>
> EZD1176I TCPIP HAS SUCCESSFULLY JOINED THE TCP/IP SYSPLEX GROUP
>EZBTCPCS
> S FTPD
>
> S PORTMAP
>
>
>
>EZZ0162I HOST NAME FOR TCPIP IS ZOS10
>EZZ0300I OPENED PROFILE FILE DD:PROFILE
>EZZ0309I PROFILE PROCESSING BEGINNING FOR DD:PROFILE
>EZZ0323I HOME STATEMENT ON LINE 136 HAD NO ENTRIES
>EZZ0316I PROFILE PROCESSING COMPLETE FOR FILE DD:PROFILE
>EZZ0334I IP FORWARDING IS DISABLED
>EZZ0335I ICMP WILL IGNORE REDIRECTS
>EZZ0331I NO HOME ADDRESS ASSIGNED TO LINK LNKOSA40
><=======================
>EZZ0338I TCP PORTS 1 THRU 1023 ARE RESERVED
>EZZ0338I UDP PORTS 1 THRU 1023 ARE RESERVED
>
>
>Regards,
>Stuart
>
>
>
>-----Original Message-----
>From: IBM Mainframe Discussion List [mailto:[email protected]] On
>Behalf Of Ed Finnell
>Sent: 19 February 2009 14:15
>To: [email protected]
>Subject: Re: OSA's Error codes
>
>
>In a message dated 2/19/2009 5:02:31 A.M. Central Standard Time,
>[email protected] writes:
>
>error Code I can find in any manual I have looked in the Data link
>control
>(DLC)
>status codes I can find 30nn and 32nn but no 31nn ?
>>>
>I plugged it into LOOKAT and got the expected answer?
>
>
>EZZ0331I No home address assigned to link linkname
>
>
>Explanation: The link was defined but no home address was given for
it.
>No
>TCP/IP traffic can flow over this link.
>System Action: TCP/IP continues.
>Operator Response: Assign a home address for the link using the HOME
>statement. Rerun the profile.
>System Programmer Response: None.
>Module: EZACFMS1
----------------------------------------------------------------------
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to [email protected] with the message: GET IBM-MAIN INFO
Search the archives at http://bama.ua.edu/archives/ibm-main.html
----------------------------------------------------------------------
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to [email protected] with the message: GET IBM-MAIN INFO
Search the archives at http://bama.ua.edu/archives/ibm-main.html
