Once a FORCE is issued, all bets are off as to the state of the ASID (and system) afterwards.
I would treat any abends seen after the intiial force as pure tourist information. The sort of collateral damage FORCE incurs includes : (1) Corrupt system and/or asid control block chains due to recovery routines not getting control to cleanup/remove objects. (2) Outstanding locks for items such as XCF structures (3) Corrupt datasets I would not be surprised if the hang of the CICS region that is starting is caused by (2). Rob Scott Developer Rocket Software 275 Grove Street * Newton, MA 02466-2272 * USA Tel: +1.617.614.2305 Email: [email protected] Web: www.rocketsoftware.com -----Original Message----- From: IBM Mainframe Discussion List [mailto:[email protected]] On Behalf Of Richards, Robert B. Sent: 29 April 2009 13:23 To: [email protected] Subject: Re: CICS Region oddity Another oddity. I tried the force and it said it was cancelable. So I issued the CANCEL command and got the following: SYSTEM COMPLETION CODE=30D TIME=08.12.41 SEQ=02209 CPU=0000 ASID=0001 PSW AT TIME OF ERROR 070C4000 86936192 ILC 2 INTC 0D NO ACTIVE MODULE FOUND NAME=UNKNOWN DATA AT PSW 0693618C - 1F001F11 05EF98EC D0649AEC AR/GR 0: 00000000/00000000 1: 00000000/00000000 2: 00000000/7F1DAEB0 3: 00000000/05077B48 4: 00000000/00FD0D40 5: 00000002/008E6828 6: 00000002/7F1DAEB0 7: 00000000/05077B48 8: 00000000/7F5B2108 9: 00000000/7F5B2108 A: 00000000/00000000 B: 00000000/06935B13 C: 00000000/06934B14 D: 00000000/7F5B1E38 E: 00000000/86936192 F: 00000000/00FFB34C END OF SYMPTOM DUMP IEF196I IEA995I SYMPTOM DUMP OUTPUT IEF196I SYSTEM COMPLETION CODE=0F4 REASON CODE=00000024 IEF196I TIME=08.12.41 SEQ=02211 CPU=0000 ASID=0001 IEF196I PSW AT TIME OF ERROR 070C5000 86996E7C ILC 2 INTC 0D IEF196I NO ACTIVE MODULE FOUND IEF196I NAME=UNKNOWN IEF196I DATA AT PSW 06996E76 - 58F800AC 0A0D5830 D76C58B0 IEF196I GR 0: 1F013647 1: 440F4000 IEF196I 2: 00000000 3: 00000004 IEF196I 4: 00000003 5: 7F5B1C78 IEF196I 6: 00000024 7: 0507A4D0 IEF196I 8: 7F5B1C78 9: 06996F38 IEF196I A: 86996DDA B: 1F010000 IEF196I C: 00FE3DA8 D: 7F5B1238 IEF196I E: 86996E64 F: 00000024 IEF196I END OF SYMPTOM DUMP IEA995I SYMPTOM DUMP OUTPUT 734 SYSTEM COMPLETION CODE=0F4 REASON CODE=00000024 TIME=08.12.41 SEQ=02211 CPU=0000 ASID=0001 PSW AT TIME OF ERROR 070C5000 86996E7C ILC 2 INTC 0D NO ACTIVE MODULE FOUND NAME=UNKNOWN DATA AT PSW 06996E76 - 58F800AC 0A0D5830 D76C58B0 GR 0: 1F013647 1: 440F4000 2: 00000000 3: 00000004 4: 00000003 5: 7F5B1C78 6: 00000024 7: 0507A4D0 8: 7F5B1C78 9: 06996F38 A: 86996DDA B: 1F010000 C: 00FE3DA8 D: 7F5B1238 E: 86996E64 F: 00000024 END OF SYMPTOM DUMP IEF743I CICSRTT1 FORCED - CODE SA22 - IN ADDRESS SPACE 00C0 Now I am totally confused. He started another region that is now hanging. He is going to cancel with a dump and send it off to IBM. Bob ---------------------------------------------------------------------- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [email protected] with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html ---------------------------------------------------------------------- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [email protected] with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html
