Tommy,

It's been a while since I set up FCTCs. However NO LOGICAL PATH
indicates a definition error. 

CUADD is used to point to the LPAR number that you are trying to connect
to if I remember right. Are you trying to connect to LPAR 1?

>From HCD you can generate a CTC connection report. This is indispensible
in figuring out whether you have the definitions correct.

Alan 

-----Original Message-----
From: IBM Mainframe Discussion List [mailto:[email protected]] On
Behalf Of Tommy Tsui
Sent: Tuesday, July 14, 2009 08:05 
To: [email protected]
Subject: IODF for FCTC connect with FICON director

Hi all,
I try to defined a FCTC but it always shows no logical path, I double
check the following setting but still don't know why?
1. The channel path is defined as long wave - correct
2. IODF setting is copied from first FCTC which is running currently.
correct
3. The current ficon director is cascade with other ficon director, is
there any setting need to change from 6140 ficon director port ???
    if the current IODF FCTC does not need cascade therefore the IODF
does not defined a domain ID
CU100    CNTLUNIT CUNUMBR=100,PATH=67,LINK=29,
               CUADD=1,UNIT=FCTC,UNITADD=((00,5))
4. I try to block and unblock the port, doesn't work



 IEE174I 20.49.18 DISPLAY M 071
 CHPID 67:  TYPE=1B, DESC=FICON SWITCHED, ONLINE
 CHPID STATUS OUT OF SYNC, PHYSICAL=ONLINE, LOGICAL=OFFLINE
 DEVICE STATUS FOR CHANNEL PATH 67
     0  1  2  3  4  5  6  7  8  9  A  B  C  D  E  F
 010 +@ +@ +@ +@ +@ +@ +@ +@ +@ +@ +@ +@ +@ +@ +@ +@
 011 +@ +@ +@ +@ .  +@ +@ +@ +@ +@ +@ +@ +@ +@ +@ +@
 012 +@ +@ +@ +@ .  +@ +@ +@ +@ +@ +@ +@ +@ +@ +@ +@
 013 +@ +@ +@ +@ .  +@ +@ +@ +@ +@ .  .  .  .  .  .
 016 +@ +@ +@ +@ +@ .  .  .  .  .  +@ +@ +@ +@ +@ +@
 017 +@ +@ +@ +@ .  +@ +@ +@ +@ +@ +@ +@ +@ +@ +@ +@
 018 +@ +@ +@ +@ .  +@ +@ +@ +@ +@ +@ +@ +@ +@ +@ +@
 019 +@ +@ +@ +@ .  +@ +@ +@ +@ +@ .  .  .  .  .  .
 SWITCH DEVICE NUMBER = 00E2
 DEFINED ENTRY SWITCH - LOGICAL SWITCH ID = 6E
 ATTACHED ND = 006140.001.MCD.01.0000013G0709
 PHYSICAL CHANNEL ID = 01C3
 ************************ SYMBOL EXPLANATIONS ************************
 + ONLINE    @ PATH NOT VALIDATED   - OFFLINE    . DOES NOT EXIST
 * PHYSICALLY ONLINE   $ PATH NOT OPERATIONAL

----------------------------------------------------------------------
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to [email protected] with the message: GET IBM-MAIN INFO
Search the archives at http://bama.ua.edu/archives/ibm-main.html

Reply via email to