It's tricky.
Dana said about LOGICAL CUs, that means single physical box with
multiple CUADDs. Usually DASD array or virtual tape (also disk array in
fact).
However in Dana case we have single physical connection CPC to CU-box.
CUADD or logical CU is like LPAR on CPC.
However in order to connect multiple physical CUs/boxes using FICON, the
switch is necessary.
The only channel with supported daisy chain was Bus & Tag.
--
Radoslaw Skorupka
Lodz, Poland
W dniu 03.06.2020 o 16:53, Seymour J Metz pisze:
We have lots of multiple CU's on a channel,
Without a switch?
--
Shmuel (Seymour J.) Metz
http://mason.gmu.edu/~smetz3
________________________________________
From: IBM Mainframe Discussion List [IBM-MAIN@LISTSERV.UA.EDU] on behalf of
Dana Mitchell [mitchd...@gmail.com]
Sent: Wednesday, June 3, 2020 9:53 AM
To: IBM-MAIN@LISTSERV.UA.EDU
Subject: Re: Base SYSPLEX setup
On Wed, 3 Jun 2020 13:05:11 +0000, Allan Staller <allan.stal...@hcl.com> wrote:
<quote> You cannot share chpid without the switch. It is point to point topology, not
daisy chains like in Bus&Tag. </quote>
That is incorrect. I routine share ahannels across LPARs.
The purpose of the switch is to concect multiple physical CECs to a single
device.
We have lots of multiple CU's on a channel, thats what CUADD is for.
When I try what Brian is doing, I receive msgCBDG198 (which there is no help
panel, have to find it in the KC):
CBDG198I There is a mix of FCTC and non-FCTC control units on channel path
proc_id.chpid. Control units: cu_number1, cu_number2
Explanation
All control units on the same channel path without dynamic switch must be
either all FCTC control units, or none of the control units must be an FCTC
control unit.
======================================================================
Jeśli nie jesteś adresatem tej wiadomości:
- powiadom nas o tym w mailu zwrotnym (dziękujemy!),
- usuń trwale tę wiadomość (i wszystkie kopie, które wydrukowałeś lub zapisałeś
na dysku).
Wiadomość ta może zawierać chronione prawem informacje, które może wykorzystać
tylko adresat.Przypominamy, że każdy, kto rozpowszechnia (kopiuje, rozprowadza)
tę wiadomość lub podejmuje podobne działania, narusza prawo i może podlegać
karze.
mBank S.A. z siedzibą w Warszawie, ul. Senatorska 18, 00-950
Warszawa,www.mBank.pl, e-mail: kont...@mbank.pl. Sąd Rejonowy dla m. st.
Warszawy XII Wydział Gospodarczy Krajowego Rejestru Sądowego, KRS 0000025237,
NIP: 526-021-50-88. Kapitał zakładowy (opłacony w całości) według stanu na
01.01.2020 r. wynosi 169.401.468 złotych.
If you are not the addressee of this message:
- let us know by replying to this e-mail (thank you!),
- delete this message permanently (including all the copies which you have
printed out or saved).
This message may contain legally protected information, which may be used
exclusively by the addressee.Please be reminded that anyone who disseminates
(copies, distributes) this message or takes any similar action, violates the
law and may be penalised.
mBank S.A. with its registered office in Warsaw, ul. Senatorska 18, 00-950
Warszawa,www.mBank.pl, e-mail: kont...@mbank.pl. District Court for the Capital
City of Warsaw, 12th Commercial Division of the National Court Register, KRS
0000025237, NIP: 526-021-50-88. Fully paid-up share capital amounting to PLN
169.401.468 as at 1 January 2020.
----------------------------------------------------------------------
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN