CF STOR(nG),ONLINE You may also need: CF E=(storage element),ONLINE
Sent from my Verizon, Samsung Galaxy smartphone ________________________________ From: IBM Mainframe Discussion List <[email protected]> on behalf of Peter Bishop <[email protected]> Sent: Monday, June 22, 2020 9:26:01 PM To: [email protected] <[email protected]> Subject: Re: Does adding real storage require an IPL? Hi Charles, Changing the image profile requires a deactivation and reactivation of the LPAR, so if the LPAR isn't already defined to allow dynamic storage reconfiguration, you will need one IPL to get to the new state where it is. The manual for this is the PR/SM Planning Guide, which has a good discussion of the basics. As Dave says, if the profile already has the storage available, CF STOR will work dynamically. When storage was more expensive, we had some Reserved storage as well as the Initial to allow for CF STOR(E=1) to move it from one test LPAR to another (overnight). Now we just have a single much larger Initial setting and avoid the movement of storage between LPARs (i.e. CF STOR OFFLINE in the donor and ONLINE in the recipient), which was sometimes delayed by tasks holding storage intended to be reallocated. best regards, Peter On 23/06/2020 10:11 am, Jousma, David wrote: > No. Might have to add it to the image profile on the HMC, and if already > there, then a CONFIG command on the console. > > _____________________________________________________________________________________________________ > Dave Jousma > AVP | Manager, Systems Engineering > > Fifth Third Bank | 1830 East Paris Ave, SE | MD RSCB2H | Grand Rapids, > MI 49546 > 616.653.8429 | fax: 616.653.2717 > > > -----Original Message----- > From: IBM Mainframe Discussion List <[email protected]> On Behalf Of > Charles Mills > Sent: Monday, June 22, 2020 8:07 PM > To: [email protected] > Subject: Does adding real storage require an IPL? > > **CAUTION EXTERNAL EMAIL** > > **DO NOT open attachments or click on links from unknown senders or > unexpected emails** > > Today is real storage day. Sorry for the elementary questions. > > The folks that own the box as a whole have added memory to our LPAR. Do we > need to IPL to pick that up in z/OS, or is there a command or similar > process? I thought I heard at a SHARE presentation that it could be done > dynamically, but the box owners are telling us an IPL is required. > > PR/SM, not VM, if that matters. > > Thanks much! > > Charles Mills > +1-707-291-0908 > > ---------------------------------------------------------------------- > For IBM-MAIN subscribe / signoff / archive access instructions, send email to > [email protected] with the message: INFO IBM-MAIN **CAUTION EXTERNAL > EMAIL** > > **DO NOT open attachments or click on links from unknown senders or > unexpected emails** > > > This e-mail transmission contains information that is confidential and may be > privileged. It is intended only for the addressee(s) named above. If you > receive this e-mail in error, please do not read, copy or disseminate it in > any manner. If you are not the intended recipient, any disclosure, copying, > distribution or use of the contents of this information is prohibited. Please > reply to the message immediately by informing the sender that the message was > misdirected. After replying, please erase it from your computer system. Your > assistance in correcting this error is appreciated. > > ---------------------------------------------------------------------- > For IBM-MAIN subscribe / signoff / archive access instructions, > send email to [email protected] with the message: INFO IBM-MAIN ---------------------------------------------------------------------- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [email protected] with the message: INFO IBM-MAIN ---------------------------------------------------------------------- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [email protected] with the message: INFO IBM-MAIN
