On 3/17/2021 12:38 PM, W Mainframe wrote:
Thanks Joe...I will check these steps...
Sent from Yahoo Mail for iPhone
On Wednesday, March 17, 2021, 12:59 PM, Joe Monk <[email protected]> wrote:
https://www.mail-archive.com/[email protected]/msg89735.html
Joe
On Wed, Mar 17, 2021 at 8:53 AM W Mainframe <
[email protected]> wrote:
Guys,Recently I bought a Multiprise 3000. It is an old dream to fill my
hardware shelf... :) The OS/2 is ok... The Software Element is ok... I can
perform lot of SE tasks. I can IPL a z/os 1.1 in emulated disks. But I
can't use the array! :(I verified this fail in my array. My SD20 was
showing a problem, red status. It was showing 0GB, but its lights are
blinking and ok. I bought a new harddisk and replaced defective SD20.After
the replacement, I am still getting same status of old SD20. Is there any
procedure in hardware level to be done? Any utility to rebuild this array?I
would appreciate any help or suggestion!Thank youDaniel
Daniel,
I have performed this action on an Integrated Server, and my own P390.
I'm not sure how the Multiprise works, but you want to look for a
message or flowerbox on the screen that the disk array manager is coming
up. There should be an option like Ctrl-A or something to being up the
array manager setup software. Since you've already replaced the
defective drive, you've got to rebuild the array in the array manager
software.
Good luck,
Tom Conley
----------------------------------------------------------------------
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to [email protected] with the message: INFO IBM-MAIN
