I have a model 2818 with s/n 02-485F7. I am fairly sure that I have a relatively low CPU capacity number, and all my unused PCIE card slots have blank fillers, but 2 of my I/O drawer slots are empty (no card or filler). If you can do a lookup, I would appreciate it.
Thank you, Enzo Damato ________________________________________ From: IBM Mainframe Discussion List <[email protected]> on behalf of Tom Brennan <[email protected]> Sent: Friday, May 27, 2022 11:53 AM To: [email protected] Subject: Re: my new z114 Do you know the serial number? It's typically on a small label on the front door. With that, someone from IBM (or maybe even me, I'm not sure) can go to IBM's Inventory Services and get the configuration data that was uploaded the last time the machine was connected to IBM's "call home" network. That data includes model, CP speed and count, cards, and other items. And if that data matches your card count, that's a good sign nobody has been picking spare parts out of the box. On 5/27/2022 7:43 AM, Enzo D'Amato wrote: > Parwez is correct that this is a M05 model, I will let you know what I have > in terms of processor capacity as soon as I finish setting up power and turn > it on. I in terms of my IO card configuration, this is what I currently have > in the box: > 2 2 port pcie 8g ficon cards (pcie) > 2 2 port rj45 Ethernet cards (pcie) > 1 4 port ficon card (IO drawer) > 2 16 port escon cards (IO drawer) > > I did want to ask however, do that crypto express cards and OSA adapters > require LICCC codes to enable? Most of my home network is 10GbE, and I wanted > to put one of those cards in so I can directly network it to my core switch, > but I don't want to order one if it will not activate. I am currently working > on sourcing FICON storage, and I will update you if I make any headway on > that front. I also have a plan and I think I will be able to get some > mainframe attached virtual tape set up. As Harry recommended, I do plan on > doing some experimenting with the bare metal on the machine, but I don't have > much experience with embedded/bare metal programming, so I would really be > starting from the ground up with that. I would like to get in contact with > someone about getting software disks/licences for my machine. I know that you > said that it would be a special order as the software is withdrawn from > marketing, but considering the circumstances, it may not hurt to ask. I would > also like to look into what would be involved in getting a LICCC capacity > upgrade (the z114 is not completely out of support until the end of this > year). If you know anyone who I should reach out to, please let me know. > > I am quite close to both the z/VM and Marist events (I am like 20 minutes > from the IBM Poughkeepsie plant), but I will have to check my calendar to see > if I can make them (I should be able to, but I may have finals that week. I > will have to check). > > I will keep this list updated as I make progress and work on getting the > system set up. > Thank you, > Enzo Damato > ________________________________________ > From: IBM Mainframe Discussion List <[email protected]> on behalf of > Timothy Sipples <[email protected]> > Sent: Friday, May 27, 2022 6:04 AM > To: [email protected] > Subject: Re: my new z114 > > Enzo, > > Congratulations on your acquisition! > > I’m curious if you happen to know yet the physical model (it’ll be either > 2818-M05 or 2818-M10) and general capacity details, notably the capacity > model, number/type(s) of specialty engines (if any; IFLs, zIIPs, ICFs), and > memory configuration. The capacity model is a letter (A to Z), the number 0, > and a number 0 to 5. For example, Q02. [A00 would be unfortunate since that’d > mean no general purpose engines (CPs) are configured. If it’s a Z05 you won > this lottery, but really any CP capacity is fine for a home lab.] Also, have > you figured out yet what features you have installed in the I/O slots? > > As I think I mentioned, if you have a 2818-M10 and/or lots of I/O features > you might be able to (unofficially, after very careful study) field modify > the physical configuration so that you’re powering fewer components to reduce > electricity consumption and heat output in your home lab. But if you have a > -M05 with just a few I/O features then this’ll be a moot point. > > I wonder if the machine has any Crypto Express adapters. > > I really like the suggestion to visit the z/VM conference if you can. There > are bound to be many curious and knowledgeable people there. If 21st Century > Software happens to be at that conference then you could ask them about VSEn > 6.3 if that interests you. There’s also a mainframe conference coming up at > Marist College in Poughkeepsie, New York, from June 12 to 14, if convenient. > > https://ecc.marist.edu/web/conference2022 > > Operating systems that do not require ECKD/FICON-attached storage > (technically, leaving any licensing issues aside): Linux, z/VM, z/VSE, VSEn. > Possibly also MUSIC/SP, as a guest of z/VM anyway, but I’m guessing a bit. I > think you can start the z/OS Customized Offerings Driver without actually > having any attached storage, but then you can’t do that much with it. > > Operating systems that require ECKD/FICON-attached storage: z/OS, z/TPF. > (z/TPF is even a little more particular about minimum storage configurations. > I believe it requires some physical or virtual tape as well.) > > There are some bootable “mini things” that people don’t generally consider > operating systems but that do serve useful functions. Standalone IOCP and Jan > Jaeger’s ZZSA are two good examples. > > Good luck, and please keep us posted. > > — — — — — > Timothy Sipples > Senior Architect > Digital Assets, Industry Solutions, and Cybersecurity > IBM zSystems/LinuxONE, Asia-Pacific > [email protected] > > > ---------------------------------------------------------------------- > For IBM-MAIN subscribe / signoff / archive access instructions, > send email to [email protected] with the message: INFO IBM-MAIN > > ---------------------------------------------------------------------- > For IBM-MAIN subscribe / signoff / archive access instructions, > send email to [email protected] with the message: INFO IBM-MAIN > . > ---------------------------------------------------------------------- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [email protected] with the message: INFO IBM-MAIN ---------------------------------------------------------------------- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [email protected] with the message: INFO IBM-MAIN
