On 2022-05-29 01:53, Joe Monk wrote:
I also wanted to ask if anyone could share the proper 3 phase to single
phase wiring for the power cable...
What? Usually a transformer is required.
Three phase requires three wires.
If a neutral is available, a load can be
connected between the neutral and one of the
wires of the three phase cable.
Be aware that the voltages between the wires of the
three phase cable are high, and can be lethal.
You need the right power cable!!!
The connections are in the z114 redbook.
Joe
On Sat, May 28, 2022 at 9:28 AM Enzo D'Amato
<[email protected]>
wrote:
This is about what I expected in terms of CPU and memory, but I have
no
idea what happened with the expansion cards. I almost certainly will
not
use 18 ficon ports anyway, so I am not too upset about those ports.
Either
way, I will ask the seller what happened with the extra channel cards.
I
also wanted to ask if anyone could share the proper 3 phase to single
phase
wiring for the power cable (I know the z114 BPRs can take 220v single
phase). I am checking the technical and physical planning guides for
this
information, but I would like to independently verify this information
so
that I don't fry my new machine.
Thanks,
Enzo Damato
----------------------------------------------------------------------
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to [email protected] with the message: INFO IBM-MAIN
