> Tom Marchant asked about output from D C,L,S:
Nothing you do in z/OS has anything to do with your problem. You said that z/OS messages are coming to your VM terminal and that it z/OS is accepting commands from the VM terminal. Everything in z/OS is fine and your problem is in VM. You want messages from the VM terminal routed somewhere in VM and issue commands to the VM terminal (specifically destined for z/OS but Ct could easily be z/VSE, CMS, Linux or even z/VM guest under z/VM. VM Programmable Operator needs both of these features and tells you how to set them up for Programmable Operator. It will tell you about the CONSOLE 3215 requirement and the CP SET SECUSER. If there are other requirements, it should tell you about those. I don't know if programmable operator is required or if you can simply use SMSG and SECUSER directly from you CMS user. Try it without programmable operator to see if it's suitable for your situation but use it's manual in setting up what is needed to remotely operate your VM guest (in this case z/OS). My guess is that you don't want z/OS console messages all the time. If so, use programmable operator to forward messages. Create a couple of commands that start forwarding message and stop forwarding messages. You may be able to SMSG your z/OS guest directly but that may be something you want to decide that best suits your needs. On Thursday, July 20, 2023 at 07:50:42 PM PDT, Phil Smith III <[email protected]> wrote: Tom Marchant asked about output from D C,L,S: RESPONSE=S0W1 CNZ4104I 21.48.57 CONSOLE SUMMARY 394 CONSOLES MATCHING COMMAND: D C,L,S NAME TYPE STATUS DEFINED MATCHED S0W10FFF MCS INACT *ALL *ALL S0W10SSI SUBSYS INACT *ALL *ALL S0W103E1 MCS ACT-S0W1 *ALL *ALL Does this tell us anything? Jon Perryman: No, not PROP. PROP uses SECUSER output, and that's what's not showing up. ---------------------------------------------------------------------- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [email protected] with the message: INFO IBM-MAIN ---------------------------------------------------------------------- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [email protected] with the message: INFO IBM-MAIN
