Here's what I have for our parallel sysplex, where we have 1E for one network
and 2E for a second network, shared by two z/OS systems with the portnames
shown. The VM comment refers to a third sharer (z/VM) which also has a link on
that channel with the portname shown (OSA2 in that case).
OSA&SYSCLONE.1 VBUILD TYPE=TRL
OSA&SYSCLONE.1E TRLE LNCTL=MPC,READ=(0400), X
WRITE=(0401),DATAPATH=(0402), X
PORTNAME=PORTA, X
MPCLEVEL=QDIO
OSA&SYSCLONE.2E TRLE LNCTL=MPC,READ=(0408), X
WRITE=(0409),DATAPATH=(040A), X
PORTNAME=OSA2, (THIS IS THE PORTNAME USED IN VM) X
MPCLEVEL=QDIO
Best regards,
Peter
On Thu, 20 Mar 2025 18:02:45 -0400, Anton Britz <[email protected]> wrote:
>Hi,
>
>Can anybody just post their working copy of their TRLE definitions ?
>
>It’s Vtam definitions you need for a ‘Channel to Channel” connection via
>the OSA card on a LPAR but you need more than just the TRLE definition
>ex. XCA definition, the PU definition etc. etc.
>
>https://www.ibm.com/docs/en/zos/2.4.0?topic=trlmn-sample-trle-vtams-connection-s390-open-systems-adapter
>
>Note : The OSA card has been activated on the HMC and z/OS can see the
>UCB address/s.
>
>Anton
>
>----------------------------------------------------------------------
>For IBM-MAIN subscribe / signoff / archive access instructions,
>send email to [email protected] with the message: INFO IBM-MAIN
----------------------------------------------------------------------
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to [email protected] with the message: INFO IBM-MAIN
