Mark, From a defined lpar you can use as you want, you will be able to restore via ftp on 3 10017 cyls free dasd (d9ecat, d9esy1, d9esy2) from hmc. Then you can create a new zvm directory (mvsdvr for example). Your dasd have to be added in it at addresses 120-122 (from memory) and osa addresses too.
You will be able to ipl the cod z/os. Follow the coguide.pdf sent with the cod. It is well explained . Resiliency Services on Z Mainframe [email protected] > Le 6 juin 2025 à 14:44, Mark Pace > <[email protected]> a écrit : > > I see that I can run the COD under z/VM. Question: Can I install COD under > z/VM? *Can the below instruction be emulated under z/VM? *I don't want to > have to modify my IOCDS/IOCP if I don't have to. > > 1.2.2.1 The System Residence Volume > You need at least one available/active Logical Partition (LPAR) as the > "Load from > Removable Media" is a disruptive task. The Central Processor Complex (CPC) > must > be powered-on and you need to be logged on to the Hardware Management > Console > (HMC) connected to that CPC as System Programmer to perform the following > tasks: > > > *• On the HMC, select the CPC object/image where you will be running the > DFDSSstand alone utility program from.* > • If you are installing the COD from a local FTP server, select option "FTP > Server", > entering the host name, user name, password, and protocol. > > -- > The postings on this site are my own and don’t necessarily represent > Mainline’s positions or opinions > > Mark D Pace > Senior Systems Engineer > Mainline Information Systems > > ---------------------------------------------------------------------- > For IBM-MAIN subscribe / signoff / archive access instructions, > send email to [email protected] with the message: INFO IBM-MAIN ---------------------------------------------------------------------- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [email protected] with the message: INFO IBM-MAIN
