Thanks, and that's the way I'll end up doing. I just didn't want to have to do the IODF/IOCP to define thost devices to the LPAR.
Doing it under VM would be so much easier attaching devices already defined to the guest as the correct virtual devices. On Fri, Jun 6, 2025 at 1:23 PM Alain Benvéniste <[email protected]> wrote: > Mark, > > From a defined lpar you can use as you want, you will be able to restore > via ftp on 3 10017 cyls free dasd (d9ecat, d9esy1, d9esy2) from hmc. > Then you can create a new zvm directory (mvsdvr for example). > Your dasd have to be added in it at addresses 120-122 (from memory) and > osa addresses too. > > You will be able to ipl the cod z/os. > Follow the coguide.pdf sent with the cod. It is well explained . > > Resiliency Services on Z Mainframe > [email protected] > > > Le 6 juin 2025 à 14:44, Mark Pace < > [email protected]> a écrit : > > > > I see that I can run the COD under z/VM. Question: Can I install COD > under > > z/VM? *Can the below instruction be emulated under z/VM? *I don't want > to > > have to modify my IOCDS/IOCP if I don't have to. > > > > 1.2.2.1 The System Residence Volume > > You need at least one available/active Logical Partition (LPAR) as the > > "Load from > > Removable Media" is a disruptive task. The Central Processor Complex > (CPC) > > must > > be powered-on and you need to be logged on to the Hardware Management > > Console > > (HMC) connected to that CPC as System Programmer to perform the following > > tasks: > > > > > > *• On the HMC, select the CPC object/image where you will be running the > > DFDSSstand alone utility program from.* > > • If you are installing the COD from a local FTP server, select option > "FTP > > Server", > > entering the host name, user name, password, and protocol. > > > > -- > > The postings on this site are my own and don’t necessarily represent > > Mainline’s positions or opinions > > > > Mark D Pace > > Senior Systems Engineer > > Mainline Information Systems > > > > ---------------------------------------------------------------------- > > For IBM-MAIN subscribe / signoff / archive access instructions, > > send email to [email protected] with the message: INFO IBM-MAIN > > ---------------------------------------------------------------------- > For IBM-MAIN subscribe / signoff / archive access instructions, > send email to [email protected] with the message: INFO IBM-MAIN > -- The postings on this site are my own and don’t necessarily represent Mainline’s positions or opinions Mark D Pace Senior Systems Engineer Mainline Information Systems ---------------------------------------------------------------------- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [email protected] with the message: INFO IBM-MAIN
