Hello Mark , That's exactly what's happening in my system . I checked the logs for several IPL's in the past and it looks like GPMSERVE is always started in that 2 second window (even my system shows a delay of 2 seconds between EZAIN11I and EZD1176I) . After EZD1176I , GPMSERVE starts w/o any issues .
Regards, Bob > > On my system I only see about 2 seconds delay between these two > messages (I checked several systems and they were all 2 seconds): > > EZAIN11I ALL TCPIP SERVICES FOR PROC TCPIP ARE AVAILABLE. > EZD1176I TCPIP HAS SUCCESSFULLY JOINED THE TCP/IP SYSPLEX GROUP EZBTCPCS > > Are you saying you always start GPMSERVE in that 2 second window (or whatever > it > is on your system)? If you are starting it prior to EZAIN11I, TCPIP is not > initialized. I looked and my client's automation and starting tasks that > require TCPIP are triggered after EZAIN11I. > > Regards, > > Mark > -- > Mark Zelden - Zelden Consulting Services - z/OS, OS/390 and MVS > mailto:[email protected] > Mark's MVS Utilities: http://www.mzelden.com/mvsutil.html > Systems Programming expert at http://expertanswercenter.techtarget.com/ > > > > > > > > >> > > >> > >> I assume you are asking because z/OS 1.11 is EOS and you don't have > >> an extended support contract with IBM?? > >> > >> Return code is "Condition management for MVS could not be initialized" > >> > >> Have you tried getting / looking at the LE dump? > >> > >> If you are sure OMVS is fully initialized (which I am assuming it is since > >> you said TCP/IP is fully functional before starting it), it could be > >> related > >> to MAXPROCUSER since it is timing related. What UID does it run under? > >> > >> You could take the easy way out (since this is an unsupported system) > >> and just start it later in the IPL to begin with! > >> > >> Mark > >> -- > >> Mark Zelden - Zelden Consulting Services - z/OS, OS/390 and MVS > >> mailto:[email protected] > >> Mark's MVS Utilities: http://www.mzelden.com/mvsutil.html > >> Systems Programming expert at http://expertanswercenter.techtarget.com/ > >> > >> ---------------------------------------------------------------------- > >> For IBM-MAIN subscribe / signoff / archive access instructions, > >> send email to [email protected] with the message: INFO IBM-MAIN > > > >---------------------------------------------------------------------- > >For IBM-MAIN subscribe / signoff / archive access instructions, > >send email to [email protected] with the message: INFO IBM-MAIN > > ---------------------------------------------------------------------- > For IBM-MAIN subscribe / signoff / archive access instructions, > send email to [email protected] with the message: INFO IBM-MAIN ---------------------------------------------------------------------- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [email protected] with the message: INFO IBM-MAIN
