There were two things in the job run I was able to see. Let me know if this
might be part of the issue
First - should you code BYPASS(HOLDS(...) HOLDE(...) )?? I always thought you
should let HOLDERROR alone unless you have a fixing PTF from IBM. Though I
could be wrong.
BYPASS(HOLDSYS(DOC,IPL,RESTART,ACTION,ENH,DEP,AO,MSGSKEL,MULTSYS,
DYNACT,EC,DB2BIND,EXIT,DELETE,DDDEF)
HOLDERROR(AA45207,AA45706,AA45113,AA44153,AA45166,AA44844,AA45744))
Second
IEW2322I 1220 923 NAME CEEPLPKA(R) MAX ACCEPTABLE
RC=00
IEW2454W 9203 SYMBOL CEEARLU UNRESOLVED. NO AUTOCALL (NCAL) SPECIFIED.
IEW2454W 9203 SYMBOL CEEBLLST UNRESOLVED. NO AUTOCALL (NCAL) SPECIFIED.
IEW2454W 9203 SYMBOL STRFTIME UNRESOLVED. NO AUTOCALL (NCAL) SPECIFIED.
IEW2454W 9203 SYMBOL LOCALECO UNRESOLVED. NO AUTOCALL (NCAL) SPECIFIED.
I think the fact that CEEPLPKA sets max cc as 0 is the issue for UI18451
Let me know if I am closer to the resolution.
Lizette
> -----Original Message-----
> From: IBM Mainframe Discussion List [mailto:[email protected]] On
> Behalf Of Paul Gilmartin
> Sent: Thursday, September 04, 2014 9:46 AM
> To: [email protected]
> Subject: Re: RSU APPLY ISSUE GIM23911E
>
> On Thu, 4 Sep 2014 21:55:32 +0530, Mainframe Mainframe wrote:
>
> >I see some more warning message before this error message like ...
> > GIM23913W LINK-EDIT PROCESSING FOR SYSMOD UA72482 WAS
> SUCCESSFUL FOR
> >MODULE
> > CBRICMMN IN LMOD CBRINIT0 IN THE LPALIB LIBRARY. THE
> RETURN CODE
> > WAS 04. DATE 14.247 - TIME 02:35:21 - SEQUENCE NUMBER
> 000087
> > SYSPRINT FILE SMP00040.
> > ...
> >
> That's from SMPOUT, not Binder SYSPRINT. Are you viewing your output with
> SDSF? If so, open the job with "?" rather than "S" and go directly to
> SMP00040 (I
> believe (E)JES has a similar feature, perhaps different syntax). Try "FIND
> p'IEW====W'" (IIRC correctly the ISPF syntax -- help!?)
>
>
> >On Thu, Sep 4, 2014 at 9:44 PM, Paul Gilmartin wrote:
> >
> >> On Thu, 4 Sep 2014 21:13:31 +0530, Mainframe Mainframe wrote:
> >>
> >> >Hello Rob,
> >> > In my case LKED entry in SMPE is set to 04.
> >> >
> >> Binder SYSPRINT (perhaps in your case SMP00030) should tell you:
> >>
> Oops! I meant SMP00040.
>
> >> o The maximum RC specified on the NAME statement (IIRC, SMP/E
> >> converts that to a comment).
> >>
> >> o The actual return code from the bind operation (look near the bottom).
> >>
> >> o Message codes, nnnn, of Warning severity. Search backward for
> >> IEWnnnnW.
>
> --gil
>
----------------------------------------------------------------------
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to [email protected] with the message: INFO IBM-MAIN
