Hello,
Yes, This time I created size with with 10GB of /u/SLE/RSU1410/temp
space and now I encountered with different space issue for SMPMCS file.
IEC031I D37-04,IFG0554P,UNZIPRSU,UNZIP,SYSUT1,8B0A,
SMPE.ZOS1D.RSU.S2654213.SMPMCS
IEA995I SYMPTOM DUMP OUTPUT 143
SYSTEM COMPLETION CODE=D37 REASON CODE=00000004
TIME=08.53.19 SEQ=00838 CPU=0000 ASID=002F
IEC031I D37-04,IFG0554P,UNZIPRSU,UNZIP,SYSUT1,8B0A,
SMPE.ZOS1D.RSU.S2654213.SMPMCS
But I have already allocated max space for this dataset.
. . . . . . . . . . . . . . . . . . . . . . . . .
. .
Data Set Information
Command ===>
More:
+
Data Set Name . . . . : SMPE.ZOS1D.RSU.S2654213.SMPMCS
General Data Current Allocation
Management class . . : **None** Allocated cylinders : 4,300
Storage class . . . : **None** Allocated extents . : 1
Volume serial . . . : TEMP01
Device type . . . . : 3390
Data class . . . . . : **None**
Organization . . . : PS Current Utilization
Record format . . . : FB Used cylinders . . : 4,300
Record length . . . : 80 Used extents . . . : 1
Block size . . . . : 27920
1st extent cylinders: 4300
Secondary cylinders : 0 Dates
Data set name type : Creation date . . . : 2014/12/04
SMS Compressible. . : NO Referenced date . . : 2014/12/09
Expiration date . . : ***None***
Unzip JCL,
//UNZIPRSU JOB 'MAINFRAME',CLASS=A,MSGCLASS=A,NOTIFY=&SYSUID
//UNZIP EXEC PGM=GIMUNZIP,PARM='HASH=NO'
//SYSUT3 DD UNIT=3390,SPACE=(CYL,(400,100))
//SYSUT4 DD UNIT=3390,SPACE=(CYL,(400,100))
//SMPOUT DD SYSOUT=*
//SYSPRINT DD SYSOUT=*
//SMPDIR DD PATH='/u/SLE/RSU1410/',
// PATHDISP=KEEP
//SMPWKDIR DD PATH='/u/SLE/RSU1410/temp',
// PATHDISP=KEEP
//SYSIN DD DATA,DLM=$$
<GIMUNZIP>
<ARCHDEF
name="SMPPTFIN/S0001.SHOPZ.S2654213.SMPMCS.pax.Z"
volume="TEMP01"
newname="SMPE.ZOS21.RSU.S2654213.SMPMCS"
replace="yes">
</ARCHDEF>
<ARCHDEF
name="SMPHOLD/S0002.SHOPZ.S2654213.SMPHOLD.pax.Z"
volume="TEMP01"
newname="SMPE.ZOS21.RSU.S2654213.SMPHOLD"
replace="yes">
</ARCHDEF>
</GIMUNZIP>
$$
As we cant create dataset bigger then this because of restriction. Please
suggest.
On Tue, Dec 9, 2014 at 10:18 PM, Lizette Koehler <[email protected]>
wrote:
> To make sure I understand.
>
> OMVS.SYS5.RSU.TEMP is mounted on /u/SLE/RSU1410/temp which is used on
> SMPWKDIR. Is that correct?
> and all of your SMP/E processes use this one file for SMPWKDIR, is that
> correct?
>
> And this file uncompressed will be 5,085,091,600 bytes or 5085M.
>
> So, with all the processes going on 7000M may not be enough. Each time a
> pax happens, storage is used and released (IIRC).
>
> You will probably need to adjust your SMPWKDIR as needed.
>
> You may need to check and see what the largest file for pax will be and
> size according to it. This may not be the largest one.
>
> Review the SMP/E manual on SMPWKDIR and see if there are any
> recommendations. I tend to oversize this file based on the largest file
> for pax.
>
> If this is a zFS file, I would allow aggrow to happen for it. If HFS
> secondary allocation would be large.
>
>
> Lizette
>
>
> -----Original Message-----
> >From: Mainframe Mainframe <[email protected]>
> >Sent: Dec 9, 2014 9:25 AM
> >To: [email protected]
> >Subject: Re: RSU UNZIP space issue.
> >
> >Yes, I am already using temp dataset with size of 7000MB.
> >
> > Data Set Information
> > Command ===>
> >
> > Data Set Name . . . : OMVS.SYS5.RSU.TEMP
> >
> > 1st extent megabytes: 7000
> > Secondary megabytes : 0
> > Data set name type : HFS Dates
> > Creation date . . . : 2014/12/04
> > Referenced date . . : 2014/12/04
> > Expiration date . . : ***None***
> >
> >Current Allocation
> > Allocated megabytes : 7,000
> > Allocated extents . : 1
> > Maximum dir. blocks : NOLIMIT
> >
> >
> >Current Utilization
> > Used pages . . . . : 1,241,552
> > % Utilized . . . . : 69
> > Number of members . : 4
> >
> >Do I need to create still bigger space for this temp as I am getting same
> >issue.
> >
> >On Tue, Dec 9, 2014 at 7:59 PM, Kurt Quackenbush <[email protected]>
> wrote:
> >
> >> On 12/9/2014 9:08 AM, Mainframe Mainframe wrote:
> >>
> >>> Hello Kurt,
> >>> Thanks for response. I just checked this
> >>> /u/SLE/RSU1410/GIMPAF.XML file and found below entry.
> >>>
> >>> <ARCHDEF
> >>> name="SMPPTFIN/S0001.SHOPZ.S2654303.SMPMCS.pax.Z"
> >>> type="SMPPTFIN"
> >>> originalsize="5085091600"
> >>> size="2760339456"
> >>> hash="1C69AA496915DB08EF19DBC53C0A0221D6EC7D39">
> >>> </ARCHDEF>
> >>>
> >>> By looking at this, can you please suggest, what should be the size of
> >>> /u/SLE/RSU1410/temp
> >>> for SMPWKDIR DD.
> >>>
> >>
> >> You can do the math, right? 56,664 bytes per track, and 15 tracks per
> >> cylinder. So 5,085,091,600 bytes == 89,742 tracks == 5983 cylinders.
> But
> >> I'd go bigger to be safe. Try 6500 cylinders.
> >>
> >>
> >> Kurt Quackenbush -- IBM, SMP/E Development
> >>
>
> ----------------------------------------------------------------------
> For IBM-MAIN subscribe / signoff / archive access instructions,
> send email to [email protected] with the message: INFO IBM-MAIN
>
----------------------------------------------------------------------
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to [email protected] with the message: INFO IBM-MAIN
