Also, if you have a product like QUICKREF - use the option S to list your volume. It is possible it is in a different group.
Lizette > -----Original Message----- > From: IBM Mainframe Discussion List [mailto:[email protected]] On > Behalf Of Lizette Koehler > Sent: Tuesday, March 01, 2016 8:24 AM > To: [email protected] > Subject: Re: error adding volumes to DFSMS storage group > > Try checking your ISPFLOG (ISPF LOG) dataset. The easiest way is to split > your screen and go to ISPF TEST function. > > Then Select 5 LOG and browse it. > > https://www- > 01.ibm.com/support/knowledgecenter/SSLTBW_1.13.0/com.ibm.zos.r13.idar100/pflog > .htm%23pflog?lang=en > > If you did not start your ISPF Session with LOG setup, then do the following > > 1) Type Settings on the command line > > 2) Top Left should be LOG/LIST > > 3) Select LOG > > 4) Update it with about 100 pages. > > 5) Do not delete log when you exit ISPF for this > > 6) PF3 back to main menu > > Now try ISMF again, and add your volumes. > When you get the error, then split screen and check your ISPF Log info from > the ISPF TEST function. > > See if you get any additional information. > > Otherwise, you probably need to open a case with IBM DFSMS. > > Lizette > > > > -----Original Message----- > > From: IBM Mainframe Discussion List [mailto:[email protected]] > > On Behalf Of Brent Snyder > > Sent: Tuesday, March 01, 2016 8:02 AM > > To: [email protected] > > Subject: Re: IBM-MAIN Digest - 28 Feb 2016 to 29 Feb 2016 (#2016-60) > > > > Dave, Lizette and Linda - > > > > The SCDS is defined with REUSE option. > > Also: > > SHROPTNS(3,3) RECOVERY UNIQUE NOERASE NOWRITECHK NONORDERED RESUSE > > NONSPANNED > > > > LISTC ENT(scds) ALL shows > > ALLOCATION > > SPACE-TYPE------CYLINDER HI-A-RBA--------66355200 > > SPACE-PRI-------------90 HI-U-RBA--------31571968 > > SPACE-SEC--------------0 > > > > Just tried to add a new volser (DASD), did not receive any IGD > > messages in the SYSLOG. > > > > HELP-----------------------------ISMF > > MESSAGE------------------------------ > > HELP > > COMMAND ===> > > > > MESSAGE NUMBER: DGTSG079 (could not find explanation of this > > error > > message) > > > > SHORT MESSAGE: NO VOLUMES DEFINED > > > > LONG MESSAGE: None of the specified volumes were DEFINED > > > > > > EXPLANATION: > > The requested function DEFINE was not successfully completed for any > > of the volumes specified. In general, if DEFINE fails it means the > > volumes have already been defined in the specified CDS. > > It could also be that the SCDS is full. > > > > SUGGESTED ACTION: > > Check the Volume Failures Panel to review the volsers you specified. > > If you believe the operation should have been successful, retry it. > > If the problem still occurs, please contact your systems programmer > > for assistance. > > > > I checked the VOLUME option, the volser is not defined to any storage > groups. > > > > I've been on this account since November, this is the first time I > > have needed to add volumes to any of the storage groups. > > > > Thank you for your time .. > > Brent Snyder > ---------------------------------------------------------------------- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [email protected] with the message: INFO IBM-MAIN
