I have to agree you need to talk with your storage people. There should be a STORCLAS defined which when processed in the ACS routines leaves with not STORCLAS set (therefore non-SMS). But, you also need to know the specific volumes at your site which are not SMS managed. Then you should be able to do
// STORCLAS=nonsms,VOL=SER=(three,spefic,volumes),unit=3390.... > -----Original Message----- > From: IBM Mainframe Discussion List [mailto:[email protected]] > On Behalf Of Charles Mills > Sent: Wednesday, April 06, 2016 11:35 AM > To: [email protected] > Subject: Re: How force dataset non-SMS? > > You can't get there from here! The ISPF approach was real promising. It took > a list of three volumes per your below. But what it actually did was > > Command ===> > > All allocated volumes: > More: + > Number of volumes allocated: 3 > > LS0503 * * > > Charles > > -----Original Message----- > From: IBM Mainframe Discussion List [mailto:[email protected]] > On Behalf Of Jousma, David > Sent: Wednesday, April 06, 2016 2:14 PM > To: [email protected] > Subject: Re: How force dataset non-SMS? > > Have you tried allocating non-sms multi volume via ISPF 3.2? > > You have to choose a DS HLQ that isn’t typically SMS managed that you have > access to create, and have some volumes that aren’t SMS managed, and then > just go through allocation, but put a slash in that last field, and you get > the > pop-up where you fill in the rest. I just did that, and was able to allocate > a > non-sms multi-volume dataset. > > I think your problem is that you don’t have the ability to tell SMS to stay > out > of the way. > > Average record unit (M, K, or U) > Primary quantity . . 15 (In above units) > Secondary quantity 30 (In above units) > Directory blocks . . 0 (Zero for sequential data set) * > Record format . . . . FB > Record length . . . . 80 > Block size . . . . . 27920 > Data set name type (LIBRARY, HFS, PDS, LARGE, BASIC, * > Data set version . : EXTREQ, EXTPREF or blank) > Num of generations : > Extended Attributes (NO, OPT or blank) > Expiration date . . . (YY/MM/DD, YYYY/MM/DD > Enter "/" to select option YY.DDD, YYYY.DDD in Julian form > / Allocate Multiple Volumes DDDD for retention period in days > or blank) > > > > Command ===> > > Enter the number of volumes to allocate or > the names of one or more volumes and > press Enter to allocate or enter Cancel > command to exit. If a number is entered, > any volume names will be ignored. > More: + > Number of volumes to allocate: > > Volume names: > 1. VSM01A 2. VSM02A 3. VSM03A 4. > 5. 6. 7. 8. > 9. 10. 11. 12. > > ---------------------------------------------------------------------- > For IBM-MAIN subscribe / signoff / archive access instructions, send email to > [email protected] with the message: INFO IBM-MAIN ---------------------------------------------------------------------- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [email protected] with the message: INFO IBM-MAIN
