Hi, It turned out that the CTN-ID value was coded in Upper case and what we used to build the CF was in Lower case.
I am still trying to see if CTN-ID values are case sensitive. Does anybody know if CTN-ID has such constraints ? On Tue, Jun 14, 2016 at 2:40 AM, Kieron D Hinds <[email protected]> wrote: > Hi, > It sounds like you have a situation where the CF you're attempting to IPL > is running on a CPC with a different CTNID than the CTNID of the CPC[s] > where other images are already active (z/OS and CFs). > I'd have to compare the CTNID in the output of the IXL160E as well as the > IEA386I from the D ETR of active system[s] in the sysplex to know for > sure, but if it the case then you'll need to get the CTNIDs to match. > > Is this the first attempt to activate the CF - if so was STP configured on > the CF CPC? Versus if it was after a configuration change made to an > existing CF, do you expect the STP configuration or the CTNID to change? > > Changing CTNIDs *can* be disruptive so please check with your local or IBM > hardware support if you don't understand this already. > > > Kieron Hinds > z/OS Integration Test / System z Platform Evaluation Test > > > > > > > > > > > > > > > > From: Nathan Astle <[email protected]> > To: [email protected] > Date: 06/13/2016 01:54 PM > Subject: Sysplex Timer issue > Sent by: IBM Mainframe Discussion List <[email protected]> > > > > Hi, > > We are receiving the error message on CF, while IPling . > > IXL160E CF REQUEST TIME ORDERING: REQUIRED AND NOT-ENABLED 194 > > REASON: CTNID MISMATCH > > > The ETR I displayed in the Console is different from the error message. > > > Does it mean i have to correct that in the IOGEN ? > > > Jake > > ---------------------------------------------------------------------- > For IBM-MAIN subscribe / signoff / archive access instructions, > send email to [email protected] with the message: INFO IBM-MAIN > > > > > > > ---------------------------------------------------------------------- > For IBM-MAIN subscribe / signoff / archive access instructions, > send email to [email protected] with the message: INFO IBM-MAIN > ---------------------------------------------------------------------- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [email protected] with the message: INFO IBM-MAIN
