Hi Lizette, I've IBM TS7740 on 4 cluster grid with TS3500 tape libraries and I wanted to have a cmd or ISPF panel that showed, in a quick way what jobs are using tape,which tape drives and what volsers are currently allocating.
The D GRS,RES=(SYSZVOLS,*) shows everything besides tape drives, but ok, that's not a big deal. I'll try Sam's utilities. I've no EMC HW or CA tools. Only IBM tools. I was also thinking about MXI with EDT parm. Anyway, many thx for your reply. Regards, Antonio Cecilio. 2016-06-21 22:20 GMT+01:00 Lizette Koehler <[email protected]>: > So it depends on the Hardware vendor. > > I have EMC, so I have the ability to run an STC and send commands to the > DLm to see what is on what tape drives. > > I would think other hardware vendors might have a similar interface. > > Or could operations have a dedicated console logged on to the controller > of the tape drive and see it that way? > > Or do you have a software tool like CA-Vantage that can do that easily? > > Lizette > > > > -----Original Message----- > > From: IBM Mainframe Discussion List [mailto:[email protected]] On > > Behalf Of Toni Cecil > > Sent: Tuesday, June 21, 2016 2:05 PM > > To: [email protected] > > Subject: Re: Quick way to show what jobs are using tape > > > > typo, correct is D GRS,RES=(SYSZVOLS,*), sorry > > > > 2016-06-21 22:04 GMT+01:00 Toni Cecil <[email protected]>: > > > > > Hello, > > > is there a quick way to the operation team know what jobs that are > > > currently active are using tape and what tape volumes ?? > > > > > > It seems like a newbie question, but when you have several ranges of > > > tape libraries addresses and hundreads of jobs running on several > > > lpars, it's not easy... > > > > > > Besides, D U,TAPE,ALLOC,,xxx, I'm thinking of D GRS,RES=(SYSZOLS.*). > > > Any ideas are welcome ?? > > > > > > I'm running z/OS 1.13 and 2.1. > > > > > > Many thx, Antonio Cecilio. > > > > > ---------------------------------------------------------------------- > For IBM-MAIN subscribe / signoff / archive access instructions, > send email to [email protected] with the message: INFO IBM-MAIN > ---------------------------------------------------------------------- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [email protected] with the message: INFO IBM-MAIN
