Some variation of D U,TAPE,ALLOC,,64
Might help you Jerry Whitteridge Manager Mainframe Systems & Storage Albertsons - Safeway Inc. 925 738 9443 Corporate Tieline - 89443 If you feel in control you just aren't going fast enough. -----Original Message----- From: IBM Mainframe Discussion List [mailto:[email protected]] On Behalf Of Toni Cecil Sent: Wednesday, June 22, 2016 12:08 PM To: [email protected] Subject: EXTERNAL: Re: Quick way to show what jobs are using tape Hi Lizette, I've IBM TS7740 on 4 cluster grid with TS3500 tape libraries and I wanted to have a cmd or ISPF panel that showed, in a quick way what jobs are using tape,which tape drives and what volsers are currently allocating. The D GRS,RES=(SYSZVOLS,*) shows everything besides tape drives, but ok, that's not a big deal. I'll try Sam's utilities. I've no EMC HW or CA tools. Only IBM tools. I was also thinking about MXI with EDT parm. Anyway, many thx for your reply. Regards, Antonio Cecilio. 2016-06-21 22:20 GMT+01:00 Lizette Koehler <[email protected]>: > So it depends on the Hardware vendor. > > I have EMC, so I have the ability to run an STC and send commands to the > DLm to see what is on what tape drives. > > I would think other hardware vendors might have a similar interface. > > Or could operations have a dedicated console logged on to the controller > of the tape drive and see it that way? > > Or do you have a software tool like CA-Vantage that can do that easily? > > Lizette > > > > -----Original Message----- > > From: IBM Mainframe Discussion List [mailto:[email protected]] On > > Behalf Of Toni Cecil > > Sent: Tuesday, June 21, 2016 2:05 PM > > To: [email protected] > > Subject: Re: Quick way to show what jobs are using tape > > > > typo, correct is D GRS,RES=(SYSZVOLS,*), sorry > > > > 2016-06-21 22:04 GMT+01:00 Toni Cecil <[email protected]>: > > > > > Hello, > > > is there a quick way to the operation team know what jobs that are > > > currently active are using tape and what tape volumes ?? > > > > > > It seems like a newbie question, but when you have several ranges of > > > tape libraries addresses and hundreads of jobs running on several > > > lpars, it's not easy... > > > > > > Besides, D U,TAPE,ALLOC,,xxx, I'm thinking of D GRS,RES=(SYSZOLS.*). > > > Any ideas are welcome ?? > > > > > > I'm running z/OS 1.13 and 2.1. > > > > > > Many thx, Antonio Cecilio. > > > > > ---------------------------------------------------------------------- > For IBM-MAIN subscribe / signoff / archive access instructions, > send email to [email protected] with the message: INFO IBM-MAIN > ---------------------------------------------------------------------- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [email protected] with the message: INFO IBM-MAIN ________________________________ Warning: All e-mail sent to this address will be received by the corporate e-mail system, and is subject to archival and review by someone other than the recipient. This e-mail may contain proprietary information and is intended only for the use of the intended recipient(s). If the reader of this message is not the intended recipient(s), you are notified that you have received this message in error and that any review, dissemination, distribution or copying of this message is strictly prohibited. If you have received this message in error, please notify the sender immediately. ________________________________ ---------------------------------------------------------------------- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [email protected] with the message: INFO IBM-MAIN
