Hi Jerry, I've several tape drives ranges, like 33xx, 34xx, 36xx, all with 256 devices. For the DISPLAY cmd I've to put how many devices to show. Thx for your reply, A.Cecilio.
2016-06-22 20:19 GMT+01:00 Jerry Whitteridge <[email protected]> : > Some variation of > > D U,TAPE,ALLOC,,64 > > Might help you > > Jerry Whitteridge > Manager Mainframe Systems & Storage > Albertsons - Safeway Inc. > 925 738 9443 > Corporate Tieline - 89443 > > If you feel in control > you just aren't going fast enough. > > > > -----Original Message----- > From: IBM Mainframe Discussion List [mailto:[email protected]] On > Behalf Of Toni Cecil > Sent: Wednesday, June 22, 2016 12:08 PM > To: [email protected] > Subject: EXTERNAL: Re: Quick way to show what jobs are using tape > > Hi Lizette, > I've IBM TS7740 on 4 cluster grid with TS3500 tape libraries and I wanted > to have a cmd or ISPF panel that showed, in a quick way what jobs are using > tape,which tape drives and what volsers are currently allocating. > > The D GRS,RES=(SYSZVOLS,*) shows everything besides tape drives, but ok, > that's not a big deal. I'll try Sam's utilities. > > I've no EMC HW or CA tools. Only IBM tools. > I was also thinking about MXI with EDT parm. > > Anyway, many thx for your reply. > Regards, Antonio Cecilio. > > 2016-06-21 22:20 GMT+01:00 Lizette Koehler <[email protected]>: > > > So it depends on the Hardware vendor. > > > > I have EMC, so I have the ability to run an STC and send commands to the > > DLm to see what is on what tape drives. > > > > I would think other hardware vendors might have a similar interface. > > > > Or could operations have a dedicated console logged on to the controller > > of the tape drive and see it that way? > > > > Or do you have a software tool like CA-Vantage that can do that easily? > > > > Lizette > > > > > > > -----Original Message----- > > > From: IBM Mainframe Discussion List [mailto:[email protected]] > On > > > Behalf Of Toni Cecil > > > Sent: Tuesday, June 21, 2016 2:05 PM > > > To: [email protected] > > > Subject: Re: Quick way to show what jobs are using tape > > > > > > typo, correct is D GRS,RES=(SYSZVOLS,*), sorry > > > > > > 2016-06-21 22:04 GMT+01:00 Toni Cecil <[email protected]>: > > > > > > > Hello, > > > > is there a quick way to the operation team know what jobs that are > > > > currently active are using tape and what tape volumes ?? > > > > > > > > It seems like a newbie question, but when you have several ranges of > > > > tape libraries addresses and hundreads of jobs running on several > > > > lpars, it's not easy... > > > > > > > > Besides, D U,TAPE,ALLOC,,xxx, I'm thinking of D GRS,RES=(SYSZOLS.*). > > > > Any ideas are welcome ?? > > > > > > > > I'm running z/OS 1.13 and 2.1. > > > > > > > > Many thx, Antonio Cecilio. > > > > > > > > ---------------------------------------------------------------------- > > For IBM-MAIN subscribe / signoff / archive access instructions, > > send email to [email protected] with the message: INFO IBM-MAIN > > > > ---------------------------------------------------------------------- > For IBM-MAIN subscribe / signoff / archive access instructions, > send email to [email protected] with the message: INFO IBM-MAIN > ________________________________ > Warning: All e-mail sent to this address will be received by the > corporate e-mail system, and is subject to archival and review by someone > other than the recipient. This e-mail may contain proprietary information > and is intended only for the use of the intended recipient(s). If the > reader of this message is not the intended recipient(s), you are notified > that you have received this message in error and that any review, > dissemination, distribution or copying of this message is strictly > prohibited. If you have received this message in error, please notify the > sender immediately. > ________________________________ > > ---------------------------------------------------------------------- > For IBM-MAIN subscribe / signoff / archive access instructions, > send email to [email protected] with the message: INFO IBM-MAIN > ---------------------------------------------------------------------- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [email protected] with the message: INFO IBM-MAIN
