Hello, After your all suggestion, I tried couple of things. 1)connect zos using ssh was working fine from putty but when I try from USA to do ssh to ssh -v 127.0.0.1 then after it was to confirm me to continue and I reply yes then at last it says password may not be entered from 3270 console.
2) under uss /etc/ssh/ssh_config I uncommented and modified line to Identityfile /home/ibm08/.ssh/authorized_keys And bring down SSH and started back. 3) I also copied /U/ibm08/.ssh/id_dsa_pub to remote host /home/ibm08/.ssh/authorized_keys But I am facing same issue as earlier while running JCL that permission denied. Please suggest On Dec 8, 2016 08:47, "Timothy Sipples" <[email protected]> wrote: > Venkat Kulkarni wrote: > >I should use SSL 992 port and with self signed certificate to enable SSL > on > >tso. Please correct me , if I am going in wrong direction. > > I should have replied to your comment earlier, but better delayed than > never. > > I recommended using a well managed, unexpired server certificate signed by > a well known certificate authority, not a self-signed certificate. > Otherwise your users' emulator clients are going to complain and/or require > extra configuration, and they should. > > You can use a self-signed certificate for initial testing perhaps, but > even if you do I wouldn't spend much time configured that way. > > ------------------------------------------------------------ > -------------------------------------------- > *Timothy Sipples* > IT Architect Executive, Industry Solutions, IBM z Systems, AP/GCG/MEA > *E-Mail:* [email protected] <[email protected]> > > ---------------------------------------------------------------------- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [email protected] with the message: INFO IBM-MAIN
