thank you I decided to do a cold start due to the fact while an attempt to move to NEWCKPRT1 or 2 during startup I received I/O errors on the CKPT files, due to time constrains on my downtime I had to get the systems back up. I've since read there are somethings I could have tried to recover, but at the time....there was no time.
Carmen ----- Original Message ----- From: "Gerhard Adam" <[email protected]> To: [email protected] Sent: Friday, July 28, 2017 9:08:21 AM Subject: Re: JES2 Checkpoint question You shouldn't need both on DASD. However, I am curious as to why you had to COLD start. -----Original Message----- From: IBM Mainframe Discussion List [mailto:[email protected]] On Behalf Of Carmen Vitullo Sent: Friday, July 28, 2017 6:55 AM To: [email protected] Subject: JES2 Checkpoint question I've looked and looked at the Init and Tuning REF and Guide and I can't seem to find an answer to my question, I'm hoping someone can provide a sanity check for me. I have a 2 system JES2 MAS both running z/OS 2.1, both checkpoints are currently in a CF with mode=duplex and duplex=on. my issue is both CF's are in the same CEC so a POR of the box for maint last month I lost all my prod spool data and was forced to perform a JES2 cold start. I need to move CKPT1 to DASD and I want to leave CKPT2 in the CF, so my question is can I still run with mode=duplex and duplex=on in that configuration, or do I need to have both CKPT's on DASD. Any insight or recommendations would be very helpful, thank you all ---------------------------------------------------------------------- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [email protected] with the message: INFO IBM-MAIN ---------------------------------------------------------------------- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [email protected] with the message: INFO IBM-MAIN ---------------------------------------------------------------------- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [email protected] with the message: INFO IBM-MAIN
