I'm wondering that too. The Redbook https://www.redbooks.ibm.com/redbooks/pdfs/sg248460.pdf
Page 149 says when installing a new Z14 you must configure OSA-ICC from scratch and I wonder if they thought that could just copy the configuration from the zBC12 I hate to ask the techs these questions when I'm only the PM but it can't hurt I guess? On Wed, Mar 27, 2019, 8:50 PM Peter <dbajava...@gmail.com> wrote: > Could be client IP hasn't been defined in the session table.try adding it > and check > > On Wed, 27 Mar, 2019, 11:47 AM Laurence Chiu, <lch...@gmail.com> wrote: > > > Well I don't know what the techs did but they managed to access the z14 > > HMC, copy across LPAR, IOCDS etc. and we've successfully IPL'ed a couple > of > > LPARs from the same DS8870 that our zBC12 uses. That's progress, > > > > But now we are finding that we cannot access the OSA-ICC for remote > access. > > The user gets the logon screen but cannot progress. I wonder if it's > > because the LU name or client IP hasn't been defined in the session > table? > > > > On Mon, Mar 25, 2019 at 3:54 PM Mike Smith <mike.sm...@nasrp.com> wrote: > > > > > Laurence, > > > > > > The Top Guns are different for each region. The best way to get the > > > proper one involved would be to contact the SSR directly or open a HW > > > incident. > > > > > > -----Original Message----- > > > From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] > On > > > Behalf Of Laurence Chiu > > > Sent: Sunday, March 24, 2019 5:58 PM > > > To: IBM-MAIN@LISTSERV.UA.EDU > > > Subject: Re: Remote access to Z14 ZR1 Support Element via HMC question > > > > > > hi Mike > > > > > > Your partially right. The tech support people want to access the hmc > > > remotely because they are located almost 80 kilometres from the > > datacenter > > > so that makes sense. > > > > > > The zBC12 and the Z14 sit alongside each other in the DR datacenter. > > Both > > > are on the same LAN segment and subnet. > > > > > > However if they cannot even access the hmc locally in the same LAN > > segment > > > the remote access is not really an issue. > > > > > > I'm not a technical person in this area but I think the goal is to > > somehow > > > replicate the settings from the z12 hmc to the z14 since we basically > > want > > > to maintain the same iocds LPAR configuration logon credentials etc. > > > > > > There seems to be a reluctance to use a USB drive because they want all > > the > > > HMC's on the network to replicate credentials and settings from more > one > > > master copy. Using a USB drive would bypass that process. But it was > > > certainly allow us to get the new Z 14 up and running. > > > > > > They are in the datacenter again today and I have not had an update so > > far. > > > But should they still encounter connection problems who is this Top > Gun Z > > > you speak of? > > > > > > l to lists...@listserv.ua.edu with the message: INFO IBM-MAIN > > > > > > > ---------------------------------------------------------------------- > > For IBM-MAIN subscribe / signoff / archive access instructions, > > send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN > > > > ---------------------------------------------------------------------- > For IBM-MAIN subscribe / signoff / archive access instructions, > send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN > ---------------------------------------------------------------------- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN