Configuring from scratch could mean from text file.
However the text file can be generated from old machine.
BTW: I'm pretty sure I configured ICC using text file and the text file
was sligthly modified version of exported one from older machine.
--
Radoslaw Skorupka
Lodz, Poland
W dniu 2019-03-27 o 21:54, Laurence Chiu pisze:
I'm wondering that too. The Redbook
https://www.redbooks.ibm.com/redbooks/pdfs/sg248460.pdf
Page 149
says when installing a new Z14 you must configure OSA-ICC from scratch and
I wonder if they thought that could just copy the configuration from the
zBC12
I hate to ask the techs these questions when I'm only the PM but it can't
hurt I guess?
On Wed, Mar 27, 2019, 8:50 PM Peter <[email protected]> wrote:
Could be client IP hasn't been defined in the session table.try adding it
and check
On Wed, 27 Mar, 2019, 11:47 AM Laurence Chiu, <[email protected]> wrote:
Well I don't know what the techs did but they managed to access the z14
HMC, copy across LPAR, IOCDS etc. and we've successfully IPL'ed a couple
of
LPARs from the same DS8870 that our zBC12 uses. That's progress,
But now we are finding that we cannot access the OSA-ICC for remote
access.
The user gets the logon screen but cannot progress. I wonder if it's
because the LU name or client IP hasn't been defined in the session
table?
On Mon, Mar 25, 2019 at 3:54 PM Mike Smith <[email protected]> wrote:
Laurence,
The Top Guns are different for each region. The best way to get the
proper one involved would be to contact the SSR directly or open a HW
incident.
-----Original Message-----
From: IBM Mainframe Discussion List [mailto:[email protected]]
On
Behalf Of Laurence Chiu
Sent: Sunday, March 24, 2019 5:58 PM
To: [email protected]
Subject: Re: Remote access to Z14 ZR1 Support Element via HMC question
hi Mike
Your partially right. The tech support people want to access the hmc
remotely because they are located almost 80 kilometres from the
datacenter
so that makes sense.
The zBC12 and the Z14 sit alongside each other in the DR datacenter.
Both
are on the same LAN segment and subnet.
However if they cannot even access the hmc locally in the same LAN
segment
the remote access is not really an issue.
I'm not a technical person in this area but I think the goal is to
somehow
replicate the settings from the z12 hmc to the z14 since we basically
want
to maintain the same iocds LPAR configuration logon credentials etc.
There seems to be a reluctance to use a USB drive because they want all
the
HMC's on the network to replicate credentials and settings from more
one
master copy. Using a USB drive would bypass that process. But it was
certainly allow us to get the new Z 14 up and running.
They are in the datacenter again today and I have not had an update so
far.
But should they still encounter connection problems who is this Top
Gun Z
you speak of?
l to [email protected] with the message: INFO IBM-MAIN
======================================================================
Jeśli nie jesteś adresatem tej wiadomości:
- powiadom nas o tym w mailu zwrotnym (dziękujemy!),
- usuń trwale tę wiadomość (i wszystkie kopie, które wydrukowałeś lub zapisałeś
na dysku).
Wiadomość ta może zawierać chronione prawem informacje, które może wykorzystać
tylko adresat.Przypominamy, że każdy, kto rozpowszechnia (kopiuje, rozprowadza)
tę wiadomość lub podejmuje podobne działania, narusza prawo i może podlegać
karze.
mBank S.A. z siedzibą w Warszawie, ul. Senatorska 18, 00-950
Warszawa,www.mBank.pl, e-mail: [email protected]. Sąd Rejonowy dla m. st.
Warszawy XII Wydział Gospodarczy Krajowego Rejestru Sądowego, KRS 0000025237,
NIP: 526-021-50-88. Kapitał zakładowy (opłacony w całości) według stanu na
01.01.2018 r. wynosi 169.248.488 złotych.
If you are not the addressee of this message:
- let us know by replying to this e-mail (thank you!),
- delete this message permanently (including all the copies which you have
printed out or saved).
This message may contain legally protected information, which may be used
exclusively by the addressee.Please be reminded that anyone who disseminates
(copies, distributes) this message or takes any similar action, violates the
law and may be penalised.
mBank S.A. with its registered office in Warsaw, ul. Senatorska 18, 00-950
Warszawa,www.mBank.pl, e-mail: [email protected]. District Court for the Capital
City of Warsaw, 12th Commercial Division of the National Court Register, KRS
0000025237, NIP: 526-021-50-88. Fully paid-up share capital amounting to PLN
169,248,488 as at 1 January 2018.
----------------------------------------------------------------------
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to [email protected] with the message: INFO IBM-MAIN
