Thanks for pointing me to the NMI Robin. Regards
-----Original Message----- From: IBM Mainframe Discussion List <[email protected]> On Behalf Of Robin Atwood Sent: Monday, April 29, 2019 8:35 AM To: [email protected] Subject: Re: TCPIP IP address for current LPAR The EZBNMIFR Network Management Interface will probably be of help here, it will tell you pretty much everything about the TCP/IP stack. Robin -----Original Message----- From: IBM Mainframe Discussion List [mailto:[email protected]] On Behalf Of Stan Weyman Sent: 29 April 2019 19:00 To: [email protected] Subject: TCPIP IP address for current LPAR Is there an accessible control block that holds the IP address (or addresses) for the current LPAR I'm running on? I have need to pass back this address to another remote application and would prefer to interrogate a control block rather than issue commands to obtain same a la D TCPIP,,NETSTAT,HOME (although this would be my alternative). A sample snippet of code would be great but the location should let me get there. Is there any other option that getting the @ from a control block or using D TCPIP,,NETSTAT,HOME? Thanks ahead of time Regards Stan ---------------------------------------------------------------------- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [email protected] with the message: INFO IBM-MAIN ---------------------------------------------------------------------- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [email protected] with the message: INFO IBM-MAIN ---------------------------------------------------------------------- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [email protected] with the message: INFO IBM-MAIN
