Thanks for the suggestion John. This or the NMI interface suggested by Robin should work. Regards
-----Original Message----- From: IBM Mainframe Discussion List <[email protected]> On Behalf Of John McKown Sent: Monday, April 29, 2019 8:32 AM To: [email protected] Subject: Re: TCPIP IP address for current LPAR On Mon, Apr 29, 2019 at 7:10 AM Stan Weyman < [email protected]> wrote: > Is there an accessible control block that holds the IP address (or > addresses) for the current LPAR I'm running on? I have need to pass back > this address to another remote application and would prefer to > interrogate a control block rather than issue commands to obtain same a la D > TCPIP,,NETSTAT,HOME (although this would be my alternative). A sample > snippet of code would be great but the location should let me get there. > > Is there any other option that getting the @ from a control block > or using D TCPIP,,NETSTAT,HOME? > https://www.ibm.com/support/knowledgecenter/en/SSLTBW_2.3.0/com.ibm.zos.v2r3.hala001/getid.htm may be what you want. > > Thanks ahead of time > > Regards > Stan > -- This is clearly another case of too many mad scientists, and not enough hunchbacks. Maranatha! <>< John McKown ---------------------------------------------------------------------- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [email protected] with the message: INFO IBM-MAIN ---------------------------------------------------------------------- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [email protected] with the message: INFO IBM-MAIN
