|
Hello Everyone, I
appreciate everyone’s patience with me on this problem. I have
been getting the message HCPCLS174E Paging I/O error; IPL failed whenever I IPL from a cuu. The
message has been explained very well but I am still trying to find out what
happened. These volumes have not been formatted or touch for
years per the old system person. We have
changed from the MP3000 with V=R/V=F/V=F on the three main VSE/ESA systems. TO a Z890
with all V=V. Plus we now have 2gig of Xstore defined to the z890. I do
have a question about CPFORMAT and the ICK03024I message below. Is
the ICK3024I message correct or should there be a filler as these are suppose
to be CPFORMATED? CPVOL LIST UNIT(123)
VERIFY(430RES) ICK00700I
DEVICE INFORMATION FOR 0123 IS CURRENTLY AS FOLLOWS: PHYSICAL DEVICE = 3390 STORAGE CONTROLLER = 3990 STORAGE CONTROL DESCRIPTOR = E9 DEVICE DESCRIPTOR = 0A ADDITIONAL DEVICE INFORMATION =
48001500 RECORDS
ICK00703I DEVICE IS OPERATED AS A MINIDISK ICK00091I
0123 NED=
3390.A34.EMC.05.000000001987 ICK091I 0123 NED= 3390.A34.EMC.05.000000001987 ICK03090I
VOLUME SERIAL = 430RES ICK03024I DEVICE IS CURRENTLY
FORMATTED WITHOUT FILLER ICK03000I
CPVOL REPORT FOR 0123 FOLLOWS:
ICK03021I
0123 IS FORMATTED FOR VM/XA|ESA MODE
CYLINDER ALLOCATION CURRENTLY IS AS
FOLLOWS: TYPE START
END TOTAL ---- -----
--- ----- PERM 0
0
1 DRCT
1 20 20 PERM 21
28 8 TDSK 29
78 50 SPOL 79
256 178 PAGE 257
390 134 PARM 391
435 45 PARM 436
480 45 PARM 481
525 45 PERM 526
3338 2813
ICK00001I
FUNCTION COMPLETED, HIGHEST CONDITION CODE WAS 0 15:45:07 07/24/06
Thanks to you all, Ed Martin |
- z/VM paging problem Edward M. Martin
- RES: z/VM paging problem Bodra - Pessoal
- Re: z/VM paging problem David Boyes
- Re: z/VM paging problem Jeff Gribbin, EDS
- Re: z/VM paging problem Rob van der Heij
- Re: z/VM paging problem Edward M. Martin
- Re: z/VM paging problem Peter . Webb
- Re: z/VM paging problem Edward M. Martin
- Re: z/VM paging problem Rob van der Heij
- Re: z/VM paging problem Edward M. Martin
