Be sure you have the 193 accessed.
Marcy Cortes "This message may contain confidential and/or privileged information. If you are not the addressee or authorized to receive this for the addressee, you must not use, copy, disclose, or take any action based on this message or any information herein. If you have received this message in error, please advise the sender immediately by reply e-mail and delete this message. Thank you for your cooperation." -----Original Message----- From: The IBM z/VM Operating System [mailto:[EMAIL PROTECTED] On Behalf Of Nix, Robert P. Sent: Monday, September 18, 2006 1:55 PM To: [email protected] Subject: Re: [IBMVM] Initially setting up CSE Removing the xlink_include statements got the system up with the rest of the CSE entries intact. I tried the XLINK FORMAT command from MAINT for 123 520RES, and got the response "Operand missing or invalid." According to the help file, the device address and label are the only two parameters. Any hints there? -- .~. Robert P. Nix Mayo Foundation /V\ RO-OC-1-13 200 First Street SW /( )\ 507-284-0844 Rochester, MN 55905 ^^-^^ ----- "In theory, theory and practice are the same, but in practice, theory and practice are different." -----Original Message----- From: The IBM z/VM Operating System [mailto:[EMAIL PROTECTED] On Behalf Of Kris Buelens Sent: Monday, September 18, 2006 3:43 PM To: [email protected] Subject: Re: Initially setting up CSE Remove the volumes from XLINK_INCLUDE in SYSTEM CONFIG. Do not forget to protect the CSE area by a dummy minidisk so that you don't place other minidisk on top of it. Kris, IBM Belgium, VM customer support
