"Schuh, Richard" <[EMAIL PROTECTED]> wrote: > Add to that that we have > some pretty heavy vendor modifications to the CP, we simply cannot use > the SERVICE/PUT2PROD approach
well - yes & no. I assume that Richard is talking about the same vendor products that we use. Our procedure is to build the IBM system (2nd level - vanilla) using all the standard tools. We then do a vendor build, which involves an override disk and results in a modified CP module using the vendor procedures. This pulls in all the SES applied updates applied. If we have new IBM service we apply that using SERVICE & PUT2PROD (without the override disk) and then do the vendor build again. Any other mods, (local or from any other source), are applied as SES mods on the localmod disk so they just get included automatically. Richard is right that we cannot use SERVICE & PUT2PROD for the updates from this vendor (but they have a pretty slick process anyway) and the final build but that does not stop us using them for all other (particularly IBM) updates. Now Richard is going to tell me that he was thinking of something completely different and I am barking at the wrong tree! With best regards / mit den besten Grüßen, Colin G Allinson Technical Manager VM Amadeus Data Processing GmbH T +49 (0) 8122-43 49 75 F +49 (0) 8122-43 32 60 [EMAIL PROTECTED] http://www.amadeus.com IMPORTANT - CONFIDENTIALITY NOTICE - This e-mail is intended only for the use of the individual or entity shown above as addressees . It may contain information which is privileged, confidential or otherwise protected from disclosure under applicable laws . If the reader of this transmission is not the intended recipient, you are hereby notified that any dissemination, printing, distribution, copying, disclosure or the taking of any action in reliance on the contents of this information is strictly prohibited. If you have received this transmission in error, please immediately notify us by reply e-mail or using the address below and delete the message and any attachments from your system . Amadeus Data Processing GmbH Geschäftsführer: Eberhard Haag Sitz der Gesellschaft: Erding HR München 48 199 Berghamer Strasse 6 85435 Erding Germany
