Hi Loren,
I tried a CPFMTXA:
cpfmtxa 7000 NU7000 Label
HCPCCF6209I INVOKING ICKDSF.
ICK030E DEFINE INPUT DEVICE: FN FT FM, "CONSOLE", OR "READER"
CONSOLE
ICK031E DEFINE OUTPUT DEVICE: FN FT FM, "CONSOLE", OR "PRINTER"
CONSOLE
ICKDSF - CMS/XA/ESA DEVICE SUPPORT FACILITIES 17.0 TIME:
15:33:27
08/29/07 PAGE 1
ENTER INPUT COMMAND:
CPVOL LABEL UNIT(7000) VOLID(NU7000) NOVFY
ICK00700I DEVICE INFORMATION FOR 7000 IS CURRENTLY AS FOLLOWS:
PHYSICAL DEVICE = 3390
STORAGE CONTROLLER = 3990
STORAGE CONTROL DESCRIPTOR = E9
DEVICE DESCRIPTOR = 0A
ADDITIONAL DEVICE INFORMATION = 4A001B35
TRKS/CYL = 15, # PRIMARY CYLS = 3339
ICK04000I DEVICE IS IN SIMPLEX STATE
ICK00091I 7000 NED= 2105. .HTC.14.000000023257
ICK091I 7000 NED= 2105. .HTC.14.000000023257
ICK03090I VOLUME SERIAL = ......
ICK003D REPLY U TO ALTER VOLUME 7000 CONTENTS, ELSE T
U
ICK03000I CPVOL REPORT FOR 7000 FOLLOWS:
ICK10710I I/O ERROR OCCURRED ON DEVICE 7000
CSW = EA92E0 0E400050 CCW = 05EB6F9C 40000050 FILEMASK = 18
SENSE = 00090401 80000000 05000000 02000000 69544C03 00F10F00 00004CE2
00000000
ICK30003I FUNCTION TERMINATED. CONDITION CODE IS 12
15:33:38 08/29/07
ENTER INPUT COMMAND:
END
ICK00002I ICKDSF PROCESSING COMPLETE. MAXIMUM CONDITION CODE WAS 12
As for the Simple State message:
ICK04000I DEVICE IS IN SIMPLEX STATE
Explanation: The device is in simplex state and not part of a
dual copy pair.
System Action: Command processing continues.
Operator Response: None.
System Programmer Response: None.
Thanks for the idea. This is a stubborn one.
Peter
-----Original Message-----
From: The IBM z/VM Operating System [mailto:[EMAIL PROTECTED] On
Behalf Of LOREN CHARNLEY
Sent: August 29, 2007 15:14
To: [email protected]
Subject: Re: DASD Problems
Peter,
I am running EMC disk array, formatted with 3390-3 disks. Some of the
information I saw below I don't see when I do a CPFMTXA format or ICKDSF
label. I did notice that you were using the INIT function which I don't
use. You could try what I have above just to get the CP format with a
label and then try the ICKDSF INIT to get a VSE type VTOC written where
you want it and put a VSE type label on it.
The following message below I don't understand: ICK04000I DEVICE IS IN
SIMPLEX STATE
Just a quick look, good luck.
Loren Charnley, Jr.
IT Systems Engineer
Family Dollar Stores, Inc.
(704) 847-6961 Ext. 3327
(704) 814-3327
[EMAIL PROTECTED]
The information transmitted is intended only for the person or entity to which
it is addressed and may contain confidential and/or privileged material. Any
review retransmission dissemination or other use of or taking of any action in
reliance upon this information by persons or entities other than the intended
recipient or delegate is strictly prohibited. If you received this in error
please contact the sender and delete the material from any computer. The
integrity and security of this message cannot by guaranteed on the Internet.
The Sender accepts no liability for the content of this e-mail or for the
consequences of any actions taken on basis of the information provided. The
recipient should check this e-mail and any attachments for the presence of
viruses. The sender accepts no liability for any damage caused by any virus
transmitted by this e-mail. This disclaimer is the property of the TTC and
must not be altered or circumvented in any manner.
