Resetting the ICC port will only affect the ICC users, if most of your
users are coming in through VM's TCP/IP stack, it's not using the ICC.
If only your console or datacenter users use the ICC, you can reset it
without affecting your users.
James M wrote:
device shows enabled.
I cannot reset the port on the hmc since it's a dual port card (icc &
tcpip) and that would mean dropping many vm & os telnet clients.
On 9/10/07, David Kreuter <[EMAIL PROTECTED]> wrote:
from the hmc try resetting the OSA port at the chpid level.
David
________________________________
From: The IBM z/VM Operating System on behalf of James M
Sent: Mon 9/10/2007 10:47 AM
To: [email protected]
Subject: [IBMVM] z/VM 5.2 ICC console connection problems
Over the weekend an operator "I did something..I don't know what" that
has rendered the ICC vm console unusable.
I tried disable/enable cuu, vary off/on path to cuu and dropping the
session from the HMC ICC utilities menu all to no avail.
Can someone please suggest other possible solutions. Thanks
-Jim
--
Rich Smrcina
VM Assist, Inc.
Phone: 414-491-6001
Ans Service: 360-715-2467
rich.smrcina at vmassist.com
http://www.linkedin.com/in/richsmrcina
Catch the WAVV! http://www.wavv.org
WAVV 2008 - Chattanooga - April 18-22, 2008
