I did try toggling the chpid off/on in each of the lpars but I'm not sure it worked properly. it went from online/online to online/standby. I never did see the current state go to offline!
On 9/10/07, Rich Smrcina <[EMAIL PROTECTED]> wrote: > Resetting the ICC port will only affect the ICC users, if most of your > users are coming in through VM's TCP/IP stack, it's not using the ICC. > If only your console or datacenter users use the ICC, you can reset it > without affecting your users. > > James M wrote: > > device shows enabled. > > I cannot reset the port on the hmc since it's a dual port card (icc & > > tcpip) and that would mean dropping many vm & os telnet clients. > > > > On 9/10/07, David Kreuter <[EMAIL PROTECTED]> wrote: > >> > >> > >> from the hmc try resetting the OSA port at the chpid level. > >> David > >> > >> ________________________________ > >> From: The IBM z/VM Operating System on behalf of James M > >> Sent: Mon 9/10/2007 10:47 AM > >> To: [email protected] > >> Subject: [IBMVM] z/VM 5.2 ICC console connection problems > >> > >> > >> > >> > >> Over the weekend an operator "I did something..I don't know what" that > >> has rendered the ICC vm console unusable. > >> I tried disable/enable cuu, vary off/on path to cuu and dropping the > >> session from the HMC ICC utilities menu all to no avail. > >> Can someone please suggest other possible solutions. Thanks > >> -Jim > >> > >> > > > > -- > Rich Smrcina > VM Assist, Inc. > Phone: 414-491-6001 > Ans Service: 360-715-2467 > rich.smrcina at vmassist.com > http://www.linkedin.com/in/richsmrcina > > Catch the WAVV! http://www.wavv.org > WAVV 2008 - Chattanooga - April 18-22, 2008 >
