True... But I was hoping to get a "Yes, this will work." or "No this will fail." just so I know where I'm going....
On 9/19/07 1:36 PM, "Kim Goldenberg" <[EMAIL PROTECTED]> wrote: > RPN01 wrote: >> I think I asked this once, but didnt get an answer.... >> >> The 5.3 install allowed me to format page and spool as 3390 mod 9 >> devices (10017 cylinders). But in fact, I was using 3390 mod 27 disks >> (32760 cylinders). If I go into the devices with ICKDSF and change the >> remaining cylinders to PAGE and SPOL, Im fairly sure nothing bad will >> happen to the page volume, but will the spool volume remain intact? Or >> will I be cold-starting and rebuilding my SDF files? >> >> Do I need to back everything up (requiring tape, which is scarce >> here), or can I get away with just doing it? >> > If you don't want to do the tape thing, you could always just do your > changes. Then, if necessary, just regenerate them with the instructions > in the Service Guide, since you indicated originally that this was an > initial system with no tailoring. > > Kim
