Thank you everyone for the help. As it turns out, this ended up being the problem. I suppose I was too hung up on thinking that I must have screwed up the IOCP somehow to consider that the CE left the CHPIDs reserved.
> -------- Original Message -------- > Subject: Re: 2105-800 FICON IOCP problem > From: Gregg <[EMAIL PROTECTED]> > Date: Wed, June 25, 2008 10:27 am > To: [email protected] > > > 05F0 The VARY ONLINE CHPID command failed because the specified channel path > is in a channel subsystem reserved state. > Check the SE, toggle the CHPID in service. > > On Wed, Jun 25, 2008 at 8:47 AM, daver++ <[EMAIL PROTECTED]> wrote: > > > Hi, we are in the process of migrating from an ESCON attached 2105-F20 > > to a FICON attached 2105-800. This is my first FICON IOCP, and I am > > having some issues. We are on a z/800 running VSE (3.1.2) under VM > > (5.2). The 2105-800 is attached directly to the z/800, no director. Here > > is the IOCP I am trying: > > > > CHPID PATH=(1E),TYPE=FC > > CHPID PATH=(1F),TYPE=FC > > CHPID PATH=(20),TYPE=FC > > CHPID PATH=(21),TYPE=FC > > ... > > CNTLUNIT CUNUMBR=0034,PATH=(1E,1F,20,21), * > > UNIT=2105,UNITADD=((00,96)),CUADD=0 > > CNTLUNIT CUNUMBR=0035,PATH=(1E,1F,20,21), * > > UNIT=2105,UNITADD=((00,96)),CUADD=1 > > CNTLUNIT CUNUMBR=0036,PATH=(1E,1F,20,21), * > > UNIT=2105,UNITADD=((00,96)),CUADD=2 > > CNTLUNIT CUNUMBR=0037,PATH=(1E,1F,20,21), * > > UNIT=2105,UNITADD=((00,96)),CUADD=3 > > CNTLUNIT CUNUMBR=0038,PATH=(1E,1F,20,21), * > > UNIT=2105,UNITADD=((00,96)),CUADD=4 > > CNTLUNIT CUNUMBR=0039,PATH=(1E,1F,20,21), * > > UNIT=2105,UNITADD=((00,96)),CUADD=5 > > CNTLUNIT CUNUMBR=0040,PATH=(1E,1F,20,21), * > > UNIT=2105,UNITADD=((00,96)),CUADD=6 > > CNTLUNIT CUNUMBR=0041,PATH=(1E,1F,20,21), * > > UNIT=2105,UNITADD=((00,96)),CUADD=7 > > IODEVICE ADDRESS=(500,96),CUNUMBR=(0034),UNIT=3390,STADET=Y,UNITADD=00 > > IODEVICE ADDRESS=(560,96),CUNUMBR=(0035),UNIT=3390,STADET=Y,UNITADD=00 > > IODEVICE ADDRESS=(5C0,96),CUNUMBR=(0036),UNIT=3390,STADET=Y,UNITADD=00 > > IODEVICE ADDRESS=(620,96),CUNUMBR=(0037),UNIT=3390,STADET=Y,UNITADD=00 > > IODEVICE ADDRESS=(680,96),CUNUMBR=(0038),UNIT=3390,STADET=Y,UNITADD=00 > > IODEVICE ADDRESS=(6E0,96),CUNUMBR=(0039),UNIT=3390,STADET=Y,UNITADD=00 > > IODEVICE ADDRESS=(740,96),CUNUMBR=(0040),UNIT=3390,STADET=Y,UNITADD=00 > > IODEVICE ADDRESS=(7A0,96),CUNUMBR=(0041),UNIT=3390,STADET=Y,UNITADD=00 > > > > I've also tried it with four byte LINKs: > > CNTLUNIT CUNUMBR=0034,PATH=(1E,1F,20,21),LINK=(****,****,****,****),... > > and two byte LINKs: > > CNTLUNIT CUNUMBR=0034,PATH=(1E,1F,20,21),LINK=(**,**,**,**),... > > > > VM is telling me error 05F0 when I try to bring up the CHPID, > > configuration error. The z800 is telling me the channel is reserved due > > to configuration error, but I can't seem to figure out what the > > configuration error is. > > > > Does anything jump out at anyone that I am completely missing here? > > > > Thanks. > > > > > > -- > Gregg Reed > "No Plan, survives execution"
