>>> On 9/11/2008 at 3:45 PM, in message
<[EMAIL PROTECTED]>, Daniel Allen
<[EMAIL PROTECTED]> wrote:
> I am running z/VM 5.2 (service level 0602).
>
> I have an OS/390 guest using the following dedicate statements:
>
> DED 104 104
> DED 105 105
> DED 106 103
>
> I have shut down the OS/390 guest.
Did you log it off and back on again?
> I have built a vswitch as follows: DEFINE VSWITCH SWITCH1 RDEV 103 PORT
> PORTVM1
Are you specifying a portname for a particular reason?
-snip-
>
> NICDEF 104 TYPE QDIO DEV 3 LAN SYSTEM SWITCH1
What is the first device number the MVS system is expecting? 104, or 103?
I.e., was the definition on MVS updated to reflect the new set of device
numbers, 104, 105, and 106?
-snip-
> Here is a Q VSWITCH SWITCH1 DET output:
>
> q vswitch switch1 det
> VSWITCH SYSTEM SWITCH1 Type: VSWITCH Connected: 1 Maxconn: INFINITE
> PERSISTENT RESTRICTED NONROUTER Accounting: OFF
> VLAN Unaware
> State: Ready
> IPTimeout: 5 QueueStorage: 8
> Portname: PORTVM1 RDEV: 0103 Controller: DTCVSW2 VDEV: 0103
> VSWITCH Connection:
> RX Packets: 0 Discarded: 4853 Errors: 0
> TX Packets: 0 Discarded: 0 Errors: 0
> RX Bytes: 0 TX Bytes: 0
> Device: 0103 Unit: 000 Role: DATA
> Adapter Owner: BH3A NIC: 0104 Name: UNASSIGNED
If the guest had successfully activated it's NIC, the last of this output would
look more like this:
Adapter Owner: LINUX013 NIC: 0700 Name: None
RX Packets: 38153 Discarded: 0 Errors: 0
TX Packets: 28935 Discarded: 0 Errors: 0
RX Bytes: 31358464 TX Bytes: 18724280
Device: 0702 Unit: 002 Role: DATA
Options: Broadcast Multicast IPv6 IPv4 VLAN
Unicast IP Addresses:
10.10.220.13 MAC: 02-00-00-00-00-07
Multicast IP Addresses:
224.0.0.1 MAC: 01-00-5E-00-00-01
224.0.1.22 MAC: 01-00-5E-00-01-16
239.255.255.253 MAC: 01-00-5E-7F-FF-FD
Mark Post
