What would cause the output of a Q VSWITCH DETAIL not have the IP address
filled in for an active linux guest?
Details below:
The following are the displays of 2 active linux guests, from the Q VSWITCH
DETAIL command, as you can see the first displays the Unicast Mac Address but
the IP address is blank, on the 2nd both are filled in.:
I am able to ssh into the one that is blank so I am know it is active.
Adapter Owner: JAS1A017 NIC: 0350.P00 Name: osaprod
Porttype: Access
RX Packets: 160312513 Discarded: 0 Errors: 0
TX Packets: 144076132 Discarded: 0 Errors: 0
RX Bytes: 70964739111 TX Bytes: 44277463882
Device: 0352 Unit: 002 Role: DATA vPort: 0073 Index: 007
VLAN: 2315
Options: Ethernet Broadcast
Unicast MAC Addresses:
02-00-01-00-00-16
Multicast MAC Addresses:
01-00-5E-00-00-01
01-00-5E-00-01-16
01-00-5E-05-68-49
01-00-5E-7F-FF-FD
33-33-00-00-00-01
33-33-FF-00-00-16
Adapter Owner: JAS1A003 NIC: 0350.P00 Name: osaprod
Porttype: Access
RX Packets: 4832273 Discarded: 0 Errors: 0
TX Packets: 1398177 Discarded: 0 Errors: 0
RX Bytes: 469879248 TX Bytes: 149763796
Device: 0352 Unit: 002 Role: DATA vPort: 0066 Index: 006
VLAN: 2315
Options: Ethernet Broadcast
Unicast MAC Addresses:
02-00-01-00-00-08 IP: 172.20.37.124
Multicast MAC Addresses:
01-00-5E-00-00-01
01-00-5E-00-01-16
01-00-5E-7F-FF-FD
33-33-00-00-00-01
33-33-FF-00-00-08
Phil Tully
Desk: 973-974-6141
Cell: 973-202-7427
Email: [email protected]
----------------------------------------------------------------------
This message and any attachments are intended only for the use of the addressee
and may contain information that is privileged and confidential. If the reader
of the message is not the intended recipient or an authorized representative of
the intended recipient, you are hereby notified that any dissemination of this
communication is strictly prohibited. If you have received this communication
in error, notify the sender immediately by return email and delete the message
and any attachments from your system.
