On 01/20/2010 01:09 PM, Philip Tully wrote:
What would cause the output of a Q VSWITCH DETAIL not have the IP address
filled in for an active linux guest?
Details below:
The following are the displays of 2 active linux guests, from the Q VSWITCH
DETAIL command, as you can see the first displays the Unicast Mac Address
but the IP address is blank, on the 2nd both are filled in.:
I am able to ssh into the one that is blank so I am know it is active.
Adapter Owner: JAS1A017 NIC: 0350.P00 Name: osaprod
Porttype: Access
RX Packets: 160312513 Discarded: 0 Errors: 0
TX Packets: 144076132 Discarded: 0 Errors: 0
RX Bytes: 70964739111 TX Bytes: 44277463882
Device: 0352 Unit: 002 Role: DATA vPort: 0073 Index: 007
VLAN: 2315
Options: Ethernet Broadcast
Unicast MAC Addresses:
02-00-01-00-00-16
Multicast MAC Addresses:
01-00-5E-00-00-01
01-00-5E-00-01-16
01-00-5E-05-68-49
01-00-5E-7F-FF-FD
33-33-00-00-00-01
33-33-FF-00-00-16
Adapter Owner: JAS1A003 NIC: 0350.P00 Name: osaprod
Porttype: Access
RX Packets: 4832273 Discarded: 0 Errors: 0
TX Packets: 1398177 Discarded: 0 Errors: 0
RX Bytes: 469879248 TX Bytes: 149763796
Device: 0352 Unit: 002 Role: DATA vPort: 0066 Index: 006
VLAN: 2315
Options: Ethernet Broadcast
Unicast MAC Addresses:
02-00-01-00-00-08 IP: 172.20.37.124
Multicast MAC Addresses:
01-00-5E-00-00-01
01-00-5E-00-01-16
01-00-5E-7F-FF-FD
33-33-00-00-00-01
33-33-FF-00-00-08
These look like layer 2 vswitches (VLAN: xxxx, MAC Addresses), and not
layer 3, which would have the IP addresses.
Kim
