Billy, I have seen the other posts and maybe they are correct. but We have an mp2003 with two OSA in it one a 10mb osa and the other a OSA FENET 100. We have recurring problems with the 10mb osa where it will not come online and the only solution I have found is to do a complete power down/off of the whole box. Just doing a POR does not even reset it takes a complete power off/down. Our OSA 10mb gets into this so called "hung" state when the LAN switch it is plugged into is rebooted (for what ever reason). There has been a couple of times where a LAN guy has applied new firmaware to the LAN switch and the only way I could get the OSA 10mb working again is to completely power down the MP2003-202. And yes before doing this I tried varying off the path, chipd , etc reloading the OAT etc but none of them did the trick. The only thing that does a complete reset of the card is a power down. (at least in my case) It should only be noted that this only happens to our 10mb OSA card which is older (generation) than our 100mb OSA FENET card. The switch the 100 is plugged into can be rebooted but the OSA 100 (is smart enough (so to speak) to recover) I do not know if the my scenario above totally to you situation. Thanks Neil "
>>> Billy Bingham <[email protected]> 1/25/2010 6:19 PM >>> Hello all, Trying to IPL VM/ESA 2.4 on an old MP2000. The box IPLs OK, but when tring to vary the OSA online I get the HCPCPN6283I... message. I do a QUERY on the device and VM shows it as an OSA, but it's offline. Any ideas? Thanks, Billy
