Frank, Would you be willing to share the steps you used to create the VSWITCH?
Thanks, Billy On 30 Aug 2010 at 8:11, Frank M. Ramaekers wrote: > > Thanks, that helps....the difference between an upCOUPLEd and a COUPLEd > VSWITCH: > > UnCOUPLEd: > AR 0015 MAC: 02-00-01-00-00-0E LAN: * NoneMFS: > 8992 > > COUPLEd (and not yet initialized): > AR 0015 MAC: 02-00-01-00-00-0E VSWITCH: SYSTEM VSWAILT > > ...and initialized: > * cp q v nic aa0 > details > AR 0015 Adapter 0AA0.P00 Type: QDIO Name: UNASSIGNED Devices: > 3 > AR 0015 MAC: 02-00-01-00-00-0E VSWITCH: SYSTEM > VSWAILT > AR 0015 RX Packets: 49 Discarded: 0 Errors: > 0 > AR 0015 TX Packets: 42 Discarded: 0 Errors: > 0 > AR 0015 RX Bytes: 2450 TX Bytes: > 2884 > AR 0015 Connection Name: Session > Established > AR 0015 Device: 0AA0 Unit: 000 Role: CTL- > READ > AR 0015 Device: 0AA1 Unit: 001 Role: CTL- > WRITE > AR 0015 Device: 0AA2 Unit: 002 Role: DATAvPort: 0065 > Index: > 0065 > > AR 0015 Options: > IPv4 > AR 0015 Unicast IP Addresses: > > AR 0015 10.1.20.2MAC: 02-00-01-00-00- > 0E > AR 0015 1I40I READY > > > Thanks Alan! > > > Frank M. Ramaekers Jr. > > > > -----Original Message----- > From: The IBM z/VM Operating System [mailto:[email protected]] On > Behalf Of Alan Altmark > Sent: Friday, August 27, 2010 3:33 PM > To: [email protected] > Subject: Re: VSWITCH defined VSE TCP/IP fails > > On Friday, 08/27/2010 at 04:28 EDT, "Frank M. Ramaekers" > <[email protected]> wrote: > > * cp q v nic aa0 details > > > > AR 0015 Adapter 0AA0.P00 Type: QDIOName: UNASSIGNED Devices: 3 > > AR 0015 MAC: 02-00-01-00-00-0ELAN: * None > > And there you have it. The adapter is not COUPLED, as indicated by the > "* > None". An uncoupled NIC is the equivalent of an unplugged ethernet > cable. > > Alan Altmark > z/VM Development > IBM Endicott > > _____________________________________________________ This message > contains information which is privileged and confidential and is solely > for the use of the intended recipient. If you are not the intended > recipient, be aware that any review, disclosure, copying, distribution, > or use of the contents of this message is strictly prohibited. If you > have received this in error, please destroy it immediately and notify us > at [email protected].
