Our PAGE volume is in the CP OWNED list and it is attached to the system. It 
just that VM does not recognize any allocation on the PAGE volume.

DASD E102 DVPAGA 3390 CKD-ECKD (UNITS IN CYLINDERS)
     TDISK TOTAL=00000000000 INUSE=00000000000 AVAIL=00000000000
     PAGE  TOTAL=00000000000 INUSE=00000000000 AVAIL=00000000000
     SPOOL TOTAL=00000000000 INUSE=00000000000 AVAIL=00000000000
     DRCT  TOTAL=00000000000 INUSE=00000000000 AVAIL=00000000000

And this PAGE was initiated as a part of the vm 6.1 installation PACK. We did 
recently migrate the DASD from one Storage sub system to a new storage system. 
I just DDR'ed 'copy all' the volumes and relabeled the new sysres, shutdown and 
re'ipled on the new storage. Do I have manually reinitialized the PAGE volumes, 
will DDR copy all not copy the allocation table.

Thank you,
Ashwin
________________________________
From: The IBM z/VM Operating System [mailto:[email protected]] On Behalf 
Of Kris Buelens
Sent: Friday, November 19, 2010 9:15 AM
To: [email protected]
Subject: Re: Page volume not recognized after IPL

If -at IPL time- a volume is included in the CP OWNED list, it is attached to 
SYSTEM automatically.

At runtime: when you ATTACH a disk to SYSTEM, CP will verify if it is in the CP 
OWNED list.

In any case, at ATTACH TO SYSTEM time: for disks in the CP OWNED list, and only 
for those, CP will read the ALLOC map to see what it can use (PAGE, SPOOL, etc).
2010/11/19 George Henke/NYLIC 
<[email protected]<mailto:[email protected]>>
Also it must be ATTACHED to SYSTEM.

I had a problem recognizing my second page pack at level 2 because it was not 
attached to level 2 as SYSTEM.

q dev# and/or q dasd volser should show its attach status,



[email protected]<mailto:[email protected]>
Sent by: The IBM z/VM Operating System 
<[email protected]<mailto:[email protected]>>

11/19/2010 06:40 AM
Please respond to
The IBM z/VM Operating System 
<[email protected]<mailto:[email protected]>>


To

[email protected]<mailto:[email protected]>

cc



Subject

Re: Page volume not recognized after IPL










Hello, Ashwin:
For the dasd to be recognized it must be formated AND allocated as PAGE with 
CPFMTXA, AND must be defined as Owned into SYSTEM CONFIG.
Is the DVRESB a new Page dasd?
To check dynamically, use these commands:

CP DEFine CPOWN SLOT 6 DVRESB
followed by other CP QUERY ALLOC

If the Query shows the page area, the problem is in the SYSTEM CONFIG. If not, 
the problem was with CPFMTXA.
______________________________________________
Clovis
From:

"Bhemidhi, Ashwin" <[email protected]<mailto:[email protected]>>

To:

[email protected]<mailto:[email protected]>

Date:

19/11/2010 07:26

Subject:

Page volume not recognized after IPL

Sent by:

The IBM z/VM Operating System 
<[email protected]<mailto:[email protected]>>


________________________________



We have recently ipl'ed one of our test z/VM 6.1 system off the our alternate 
sysres pack. The system does not seem to recognize the page volume. Is there 
something I did not configure?

I am ready to add another page volume to make sure that it does not ABEND due 
to lack of page space. I will check the allocation on the PAGE volume after I 
add some PAGE DASD.

Thank you,
Ashwin Bhemidhi

q alloc page
               EXTENT     EXTENT  TOTAL  PAGES   HIGH    %
VOLID  RDEV      START        END  PAGES IN USE   PAGE USED
------ ---- ---------- ---------- ------ ------ ------ ----
*         *          -          -      0      0      0   0% NOT FOUND
Ready; T=0.01/0.01 03:07:31



q alloc
DASD E100 DVRESA 3390 CKD-ECKD (UNITS IN CYLINDERS)
    TDISK TOTAL=00000000000 INUSE=00000000000 AVAIL=00000000000
    PAGE  TOTAL=00000000000 INUSE=00000000000 AVAIL=00000000000
    SPOOL TOTAL=00000000000 INUSE=00000000000 AVAIL=00000000000
    DRCT  TOTAL=00000000020 INUSE=00000000002 AVAIL=00000000018, ACTIVE
DASD E101 DVSPLA 3390 CKD-ECKD (UNITS IN CYLINDERS)
    TDISK TOTAL=00000000000 INUSE=00000000000 AVAIL=00000000000
    PAGE  TOTAL=00000000000 INUSE=00000000000 AVAIL=00000000000
    SPOOL TOTAL=00000003338 INUSE=00000001775 AVAIL=00000001563
    DRCT  TOTAL=00000000000 INUSE=00000000000 AVAIL=00000000000
DASD E102 DVPAGA 3390 CKD-ECKD (UNITS IN CYLINDERS)
    TDISK TOTAL=00000000000 INUSE=00000000000 AVAIL=00000000000
    PAGE  TOTAL=00000000000 INUSE=00000000000 AVAIL=00000000000
    SPOOL TOTAL=00000000000 INUSE=00000000000 AVAIL=00000000000
    DRCT  TOTAL=00000000000 INUSE=00000000000 AVAIL=00000000000
DASD E103 DVW01A 3390 CKD-ECKD (UNITS IN CYLINDERS)
    TDISK TOTAL=00000000000 INUSE=00000000000 AVAIL=00000000000
    PAGE  TOTAL=00000000000 INUSE=00000000000 AVAIL=00000000000
    SPOOL TOTAL=00000000000 INUSE=00000000000 AVAIL=00000000000
    DRCT  TOTAL=00000000000 INUSE=00000000000 AVAIL=00000000000
DASD E104 DVW02A 3390 CKD-ECKD (UNITS IN CYLINDERS)
    TDISK TOTAL=00000000000 INUSE=00000000000 AVAIL=00000000000
    PAGE  TOTAL=00000000000 INUSE=00000000000 AVAIL=00000000000
    SPOOL TOTAL=00000000000 INUSE=00000000000 AVAIL=00000000000
    DRCT  TOTAL=00000000000 INUSE=00000000000 AVAIL=00000000000
IPL NUCLEUS ACTIVE ON VOLUME DVRESA


q cpowned
Slot  Vol-ID  Rdev  Type   Status
  1  DVRESA  E100  Own    Online and attached
  2  DVSPLA  E101  Own    Online and attached
  3  DVPAGA  E102  Own    Online and attached
  4  DVW01A  E103  Own    Online and attached
  5  DVW02A  E104  Own    Online and attached
  6  ------  ----  -----  Reserved
  7  ------  ----  -----  Reserved
  8  ------  ----  -----  Reserved
  9  ------  ----  -----  Reserved
 10  ------  ----  -----  Reserved

q e100-e105
DASD E100 CP OWNED  DVRESA   78
DASD E101 CP OWNED  DVSPLA   1
DASD E102 CP OWNED  DVPAGA   0
DASD E103 CP OWNED  DVW01A   118
DASD E104 CP OWNED  DVW02A   52
DASD E105 DVRESB




--
Kris Buelens,
IBM Belgium, VM customer support

Reply via email to