Hello, Saurabh.
In this case, the CMS HELP command is your friend....try doing a
HELP DMSDKD1307T
>From the help text, you will see that the error being reported is from
the DMSAUD module in the TRKAL function. Return code 8 from the TRKAL
function means:
8 No blocks are allocated and user area is unmodified. This is
generally an indication of one of the following:
- The number of blocks marked as available in the allocation map
does not match block counts indicated in the minidisk label
record.
- Virtual storage for the disk's allocation map has been
corrupted.
- The allocation map on disk has been damaged due to
pre-existing corruption.
It appears that your 191 minidisk on the PERFSVM machine has been
corrupted somehow, or that the virtual storage holding the minidisk's
allocation map has been corrupted.
You might first want to try increasing PERFSVM's virtual storage from
its default of 64M to something bigger....like 256M.
Hope this helps.
DJ
On 08/05/2011 10:47 AM, saurabh khandelwal wrote:
> Hello,
> We have zVM 5.4 System. And I am trying to login with PERFSVM id,
> I get below error while connecting.
>
> LOGON PERFSVM
> ENTER PASSWORD (IT WILL NOT APPEAR WHEN TYPED):
>
> 21:38:57 z/VM Version 5 Release 4.0, Service Level 1001 (64-bit),
> 21:38:57 built on IBM Virtualization Technology
> 21:38:57 There is no logmsg data
> 21:38:57 FILES: NO RDR, NO PRT, NO PUN
> 21:38:57 LOGON AT 21:38:57 PDT THURSDAY 08/04/11
> 21:38:57 GRAF L0004 LOGON AS PERFSVM USERS = 21 FROM 10.159.14.88
> z/VM V5.4.0 2010-02-16 14:54
> DMSACP723I B (201) R/O
> DMSACP723I D (1CC) R/O
> DMSACP723I F (29D) R/O
> 21:38:57 Command complete
> 21:38:57 Command complete
> 21:38:57 Command complete
> 21:38:57 Command complete
> DMSDKD1307T File system error detected by DMSAUD at address 00F1D940 (offset
> 000
> 007A8):
> DMSDKD1307T TRKAL request failed with code 8 during an I/O operation using
> virtu
> al device 191 (mode 'A')
> 21:38:57 HCPGIR450W CP entered; disabled wait PSW 000A0000 00F082CA
>
> To isolate this, I tried checking user directory for PERFSVM for 191 mini
> disk.
>
> USER PERFSVM PERFSVM 64M 512M ABDEG
> MACHINE ESA
> XAUTOLOG AUTOLOG1
> ACCOUNT xxxx
> NAMESAVE MONDCSS
> IUCV *MONITOR MSGLIMIT 255
> IUCV *IDENT FCXRES00 GLOBAL
> IUCV *IDENT FCXSYSTM GLOBAL
> IUCV ALLOW
> SHARE ABS 3%
> IPL CMS PARM AUTOCR
> OPTION QUICKDSP DIAG88
> CONSOLE 0009 3215
> SPOOL 000C 2540 READER *
> SPOOL 000D 2540 PUNCH A
> SPOOL 000E 1403 A
> LINK MAINT 190 190 RR
> LINK MAINT 19D 19D RR
> LINK MAINT 19E 19E RR
> LINK 5VMPTK40 200 200 RR
> LINK 5VMPTK40 201 201 RR
> LINK 5VMPTK40 1CC 1CC RR
> LINK 5VMPTK40 29D 29D RR
> MDISK 191 3390 6250 120 540RES MR READ WRITE MULTIPLE
> MDISK 195 3390 6370 060 540RES MR READ WRITE MULTIPLE
>
> Also I logged using MAINT and enabled this product again .
> *set product prodid 5vmptk40 state enabled
> *
> But, still I am getting same error for evice 191 (mode 'A').
>
> Can you help me resolve this isse, so tht I can run performence took lit
>
--
Dave Jones
V/Soft Software
www.vsoft-software.com
Houston, TX
281.578.7544
