Thanks every one for replying me . I have noticed one thing in our setup.
We have two z/VM running and their DASD are in shared mode.In both the system Performance tool kit user PERFSVM contain 191 ( Disk) , which part of same 540RES volume. I think this might be a reason to cause problem , that two system pointing to same RES volume Please correct me, if my understanding is wrong. Regards Saurabh On Fri, Aug 5, 2011 at 9:27 PM, Dave Jones <d...@vsoft-software.com> wrote: > Hello, Saurabh. > > In this case, the CMS HELP command is your friend....try doing a > > HELP DMSDKD1307T > > From the help text, you will see that the error being reported is from > the DMSAUD module in the TRKAL function. Return code 8 from the TRKAL > function means: > > 8 No blocks are allocated and user area is unmodified. This is > generally an indication of one of the following: > > - The number of blocks marked as available in the allocation map > does not match block counts indicated in the minidisk label > record. > > - Virtual storage for the disk's allocation map has been > corrupted. > > - The allocation map on disk has been damaged due to > pre-existing corruption. > > It appears that your 191 minidisk on the PERFSVM machine has been > corrupted somehow, or that the virtual storage holding the minidisk's > allocation map has been corrupted. > > You might first want to try increasing PERFSVM's virtual storage from > its default of 64M to something bigger....like 256M. > Hope this helps. > > DJ > > On 08/05/2011 10:47 AM, saurabh khandelwal wrote: > > Hello, > > We have zVM 5.4 System. And I am trying to login with PERFSVM > id, > > I get below error while connecting. > > > > LOGON PERFSVM > > ENTER PASSWORD (IT WILL NOT APPEAR WHEN TYPED): > > > > 21:38:57 z/VM Version 5 Release 4.0, Service Level 1001 (64-bit), > > 21:38:57 built on IBM Virtualization Technology > > 21:38:57 There is no logmsg data > > 21:38:57 FILES: NO RDR, NO PRT, NO PUN > > 21:38:57 LOGON AT 21:38:57 PDT THURSDAY 08/04/11 > > 21:38:57 GRAF L0004 LOGON AS PERFSVM USERS = 21 FROM 10.159.14.88 > > z/VM V5.4.0 2010-02-16 14:54 > > DMSACP723I B (201) R/O > > DMSACP723I D (1CC) R/O > > DMSACP723I F (29D) R/O > > 21:38:57 Command complete > > 21:38:57 Command complete > > 21:38:57 Command complete > > 21:38:57 Command complete > > DMSDKD1307T File system error detected by DMSAUD at address 00F1D940 > (offset > > 000 > > 007A8): > > DMSDKD1307T TRKAL request failed with code 8 during an I/O operation > using > > virtu > > al device 191 (mode 'A') > > 21:38:57 HCPGIR450W CP entered; disabled wait PSW 000A0000 00F082CA > > > > To isolate this, I tried checking user directory for PERFSVM for 191 mini > > disk. > > > > USER PERFSVM PERFSVM 64M 512M ABDEG > > MACHINE ESA > > XAUTOLOG AUTOLOG1 > > ACCOUNT xxxx > > NAMESAVE MONDCSS > > IUCV *MONITOR MSGLIMIT 255 > > IUCV *IDENT FCXRES00 GLOBAL > > IUCV *IDENT FCXSYSTM GLOBAL > > IUCV ALLOW > > SHARE ABS 3% > > IPL CMS PARM AUTOCR > > OPTION QUICKDSP DIAG88 > > CONSOLE 0009 3215 > > SPOOL 000C 2540 READER * > > SPOOL 000D 2540 PUNCH A > > SPOOL 000E 1403 A > > LINK MAINT 190 190 RR > > LINK MAINT 19D 19D RR > > LINK MAINT 19E 19E RR > > LINK 5VMPTK40 200 200 RR > > LINK 5VMPTK40 201 201 RR > > LINK 5VMPTK40 1CC 1CC RR > > LINK 5VMPTK40 29D 29D RR > > MDISK 191 3390 6250 120 540RES MR READ WRITE MULTIPLE > > MDISK 195 3390 6370 060 540RES MR READ WRITE MULTIPLE > > > > Also I logged using MAINT and enabled this product again . > > *set product prodid 5vmptk40 state enabled > > * > > But, still I am getting same error for evice 191 (mode 'A'). > > > > Can you help me resolve this isse, so tht I can run performence took lit > > > > -- > Dave Jones > V/Soft Software > www.vsoft-software.com > Houston, TX > 281.578.7544 > -- Thanks & Regards Saurabh Khandelwal
