Having written a couple articles about Nautical Terms and their origins,
May I offer an observation?

While I recognize that English is a Dynamic language, and that Usage  often 
dictates definition..
One of my pet peeves is what is happening to the use of "Cringle".

Here is a copy of a recent posting I researched and wrote to another email list.

Accept it or Not...  I only submit it for your consideration ...
Edited in part from several Nautical Reference books.. Namely:

The Oxford Companion to Ships and the Sea     by KEMP, 1976
And,
The Sailor's Word Book..  By Adm. W.H. Smyth     1867
And,
The Oxford Dictionary


(Excerpt).....

"CRINGLE and THIMBLE:
There are TWO parts to an "EYE"  of a  sail..  The  Thimble and 
the Cringle.

So...  CRINGLE...
A short piece of rope worked into grommet fashion (Here's the killer)...INTO 
the BOLT ROPE of a sail..
And CONTAINING.. a Ring or Thimble....
.....From:  the Low Middle German... "KRINK"   meaning  "CIRCLE."

GROMMET:(also called GRUMMET)....
A RING formed by Laying up rope and used to fasten the upper edge or Luff of 
a sail. Also used in various places on a ship.
(Note: One such grommet was what held the SHOT ready for cannons. It was 
called the Shot Grommet....NOT a "Brass Monkey" which never existed and is a 
modern Myth.)
.....Possibly From: Obsolete French for .."Bridle Ring" .  (May be from Old 
French....  "Worm")

THIMBLE :....
A CIRCULAR or heart-shaped RING, usually of Iron or aluminum, grooved to 
receive a rope which is SPLICED around it to form an "EYE".
... From....Old English... "Thymbel"  or "Thuma"   meaning  THUMB

So, folks that metal Ring you have at the Clew and Tack of your sail is 
Really a THIMBLE..(Ok, you can call it a Grommet now)
To make it a CRINGLE.. the ring would have to be wrapped by a rope that  is 
Spliced into the Bolt rope of your sail. Not likely with most of us.



(End Excerpt)....
Attached is a Graphic of the Traditional  "CRINGLE"



With Best Regards,

Ralph Ahseln
"Oblio"
Gresham OR



  ----- Original Message ----- 
  From: John Guttridge 
  To: [email protected] 
  Sent: Tuesday, June 16, 2009 9:24 AM
  Subject: Clews and Cringles was: RE: [IC27A] Re: Was Jib Sheets > Barber 
Hauler


   

  

Reply via email to