Keith - it was not Bristol Finish, although that seems interesting. It was not a urethane or varnish, as I recall. More of an oil rub.
John For all those whose cares have been our concern, the work goes on, the cause endures, the hope still lives, and the dream shall never die. -----Original Message----- From: Sneddon, Keith - ES/IS <[email protected]> To: '[email protected]' <[email protected]> Sent: Thu, Nov 19, 2009 2:20 pm Subject: RE: [IC27A] Wood Finish There are quite a few options, but I kind of like Bristol Finish. Keith Sneddon #4760, "Are We There Yet?" ________________________________ From: [email protected] [mailto:[email protected]] On Behalf Of [email protected] Sent: Thursday, November 19, 2009 2:02 PM To: [email protected]; [email protected] Subject: [IC27A] Wood Finish Not too long ago someone on one of these lists discussed a somewhat pricey but highly recommended product for doing brightwork. I have searched my archives and the archives of both list's messages and cannot locate. Could you please send out again? I apologize for losing it in the first place. John McLaughlin 1975 SR #1994 "Shambhala" For all those whose cares have been our concern, the work goes on, the cause endures, the hope still lives, and the dream shall never die. [Non-text portions of this message have been removed] ________________________________ This e-mail and any files transmitted with it may be proprietary and are intended solely for the use of the individual or entity to whom they are addressed. If you have received this e-mail in error please notify the sender. Please note that any views or opinions presented in this e-mail are solely those of the author and do not necessarily represent those of ITT Corporation. The recipient should check this e-mail and any attachments for the presence of viruses. ITT accepts no liability for any damage caused by any virus transmitted by this e-mail. [Non-text portions of this message have been removed] [Non-text portions of this message have been removed]
