My steaming light and spreader circuit seem crossed, as either switch turns them both on. I haven't investigated it yet, but the common gound could be the gremlin here? You posters have been most informative. Thanks.
--- On Fri, 2/12/10, ivan <[email protected]> wrote: From: ivan <[email protected]> Subject: Re: [IC27A] Masthead light wiring To: [email protected] Date: Friday, February 12, 2010, 6:46 AM Is there a separate ground for the steaming light versus the anchor lights and mast lights? The reason I ask is that both mast lights and anchor light are not working but the steaming light does. I stepped the mast for the first time last year so I'm just trying to figure out where I should think about looking and whether I should plan to step the mast again this year or just plan on a trip up the mast. Thanks -Ivan --- On Wed, 2/10/10, mujin2000 <mujin2...@yahoo. com> wrote: From: mujin2000 <mujin2...@yahoo. com> Subject: [IC27A] Masthead light wiring To: ic...@yahoogroups. com Date: Wednesday, February 10, 2010, 11:35 PM There is an open somewhere between the light and the DC panel. Does anyone know if there is an intermediary place to probe and how are the wires routed? [Non-text portions of this message have been removed] [Non-text portions of this message have been removed]
